windmill

/wind"mil'/, n.
1. any of various machines for grinding, pumping, etc., driven by the force of the wind acting upon a number of vanes or sails.
2. (loosely) a wind generator; wind plant.
3. Aeron. a small air turbine with blades, like those of an airplane propeller, exposed on a moving aircraft and driven by the air, used to operate gasoline pumps, radio apparatus, etc.
4. an imaginary opponent, wrong, etc. (in allusion to Cervantes' Don Quixote): to tilt at windmills.
v.i., v.t.
5. Aeron. (of a propeller engine or turbojet engine) to rotate or cause to rotate solely under the force of a passing airstream.
[1250-1300; ME; see WIND1, MILL1]

* * *

Machine for harnessing the energy of the wind using sails mounted on a rotating shaft.

The sails are mounted at an angle or are given a slight twist, so that the force of wind against them has two components, one of which, in the plane of the sails, causes rotation. Like waterwheels, windmills were among the original prime movers that replaced human beings as a source of power. Their most important traditional use was for grinding grain, though in certain areas their use in land drainage and water pumping was equally important. Windmill use became increasingly widespread in Europe (particularly the Netherlands) from the 12th century to the early 19th century, but thereafter slowly declined. Interest in windmills for generating electric power revived in the 1970s. See also wind power.

* * *

 device for tapping the energy of the wind by means of sails mounted on a rotating shaft. The sails are mounted at an angle or are given a slight twist so that the force of wind against them is divided into two components, one of which, in the plane of the sails, imparts rotation.

 Like waterwheels, windmills were among the original prime movers that replaced human beings as a source of power. The use of windmills was increasingly widespread in Europe from the 12th century until the early 19th century. Their slow decline, because of the development of steam power, lasted for a further 100 years. Their rapid demise began following World War I with the development of the internal-combustion engine and the spread of electric power; from that time on, however, electrical generation by wind power has served as the subject of more and more experiments.

      The earliest-known references to windmills are to a Persian millwright in AD 644 and to windmills in Seistan, Persia, in AD 915. These windmills are of the horizontal-mill type, with sails radiating from a vertical axis standing in a fixed building, which has openings for the inlet and outlet of the wind diametrically opposite to each other. Each mill drives a single pair of stones directly, without the use of gears, and the design is derived from the earliest water mills. Persian millwrights, taken prisoner by the forces of Genghis Khan, were sent to China to instruct in the building of windmills; their use for irrigation there has lasted ever since.

 The vertical windmill, with sails on a horizontal axis, derives directly from the Roman water mill with its right-angle drive to the stones through a single pair of gears. The earliest form of vertical mill is known as the post mill. It has a boxlike body containing the gearing, millstones, and machinery and carrying the sails. It is mounted on a well-supported wooden post socketed into a horizontal beam on the level of the second floor of the mill body. On this it can be turned so that the sails can be faced into the wind.

      The next development was to place the stones and gearing in a fixed tower. This has a movable top, or cap, which carries the sails and can be turned around on a track, or curb, on top of the tower. The earliest-known illustration of a tower mill is dated about 1420. Both post and tower mills were to be found throughout Europe and were also built by settlers in America.

      To work efficiently, the sails of a windmill must face squarely into the wind, and in the early mills the turning of the post-mill body, or the tower-mill cap, was done by hand by means of a long tailpole stretching down to the ground. In 1745 Edmund Lee in England invented the automatic fantail. This consists of a set of five to eight smaller vanes mounted on the tailpole or the ladder of a post mill at right angles to the sails and connected by gearing to wheels running on a track around the mill. When the wind veers it strikes the sides of the vanes, turns them and hence the track wheels also, which turn the mill body until the sails are again square into the wind. The fantail may also be fitted to the caps of tower mills, driving down to a geared rack on the curb.

      The sails of a mill are mounted on an axle, or windshaft, inclined upward at an angle of from 5° to 15° to the horizontal. The first mill sails were wooden frames on which sailcloth was spread; each sail was set individually with the mill at rest. The early sails were flat planes inclined at a constant angle to the direction of rotation; later they were built with a twist like that of an airplane propeller.

      In 1772 Andrew Meikle (Meikle, Andrew), a Scot, invented his spring sail, substituting hinged shutters, like those of a Venetian blind, for sailcloths and controlling them by a connecting bar and a spring on each sail. Each spring had to be adjusted individually with the mill at rest according to the power required; the sails were then, within limits, self-regulating.

      In 1789 Stephen Hooper in England utilized roller blinds instead of shutters and devised a remote control to enable all the blinds to be adjusted simultaneously while the mill was at work. In 1807 Sir William Cubitt invented his “patent sail” combining Meikle's hinged shutters with Hooper's remote control by chain from the ground via a rod passing through a hole drilled through the windshaft; the operation was comparable to operating an umbrella; by varying the weights hung on the chain the sails were made self-regulating.

      The annular-sailed wind pump was brought out in the United States by Daniel Hallady in 1854, and its production in steel by Stuart Perry in 1883 led to worldwide adoption, for, although inefficient, it was cheap and reliable. The design consists of a number of small vanes set radially in a wheel. Governing is automatic: of yaw by tail vane, and of torque by setting the wheel off-centre with respect to the vertical yaw axis. Thus, as the wind increases the mill turns on its vertical axis, reducing the effective area and therefore the speed.

      The most important use of the windmill was for grinding grain. In certain areas its uses in land drainage and water pumping were equally important. The windmill has been used as a source of electrical power (electric power) since P. La Cour's mill, built in Denmark in 1890 with patent sails and twin fantails on a steel tower. Interest in the use of windmills for the generation of electric power, on both single-user and commercial scales, revived in the 1970s.

* * *


Universalium. 2010.

Look at other dictionaries:

  • Windmill — (Эрмоуполис,Греция) Категория отеля: Адрес: Ano Syros, Эрмоуполис, 84100, Греция …   Каталог отелей

  • Windmill — (Аргасион,Греция) Категория отеля: 2 звездочный отель Адрес: Argasi, Аргасион, 29100, Греци …   Каталог отелей

  • windmill — [wind′mil΄] n. 1. a mill operated by the wind s rotation of large, oblique sails or vanes radiating from a shaft: used as a source of power for grinding grain, pumping water, generating electricity, etc. 2. anything like a windmill, as a… …   English World dictionary

  • windmill — windmill·er; windmill; …   English syllables

  • windmill — ► NOUN ▪ a building with sails or vanes that turn in the wind and generate power to grind corn, generate electricity, or draw water. ► VERB ▪ move (one s arms) in a manner suggestive of the sails of a windmill …   English terms dictionary

  • Windmill — Wind mill , n. A mill operated by the power of the wind, usually by the action of the wind upon oblique vanes or sails which radiate from a horizontal shaft. Chaucer. [1913 Webster] …   The Collaborative International Dictionary of English

  • windmill — (n.) c.1300, from WIND (Cf. wind) (n.1) + MILL (Cf. mill) (n.). Cf. Ger. Windmühle, Du. windmolen, Fr. moulin à vent (13c.). Verb meaning to swing the arms wildly is recorded from 1927 …   Etymology dictionary

  • Windmill — A windmill is a machine that is powered by the energy of the wind. It is designed to convert the energy of the wind into more useful forms using rotating blades or sails. The term also refers to the structure it is commonly built on. In much of… …   Wikipedia

  • Windmill — Recorded in the spellings of Wind Mill, Windmill, and Winmill, this unusual and long established name is English. It is residential for somebody who lived or worked at a windmill, or who came from one of the various places called Windmill in… …   Surnames reference

  • windmill — I. noun Date: 14th century 1. a. a mill or machine operated by the wind usually acting on oblique vanes or sails that radiate from a horizontal shaft; especially a wind driven water pump or electric generator b. the wind driven wheel of a… …   New Collegiate Dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.