- —metalworker, n./met"l werrk'/, n.objects made of metal.[1840-50; METAL + WORK]
* * *Useful and decorative objects fashioned of various metals.The oldest technique is hammering. After с 2500 BC, casting was also used, molten metal being poured into a mold and allowed to cool. Various decorative techniques are used. Gold and silver have been worked since ancient times. Gold and silver objects were in such demand in the 12th century that gold-and silversmiths organized guilds. High-quality gold and silver objects were produced in pre-Columbian America. Copper was worked in ancient Egypt and was widely used for household utensils in 17th–18th-century Europe. Both bronze and brass were widely used in ancient Greece. Pewter plates and tankards were made in the Middle Ages and remained popular until they were superseded by cheaper earthenware and porcelain in the 18th century. Wrought iron has been used for decorative hinges, gates, and railings since the 16th century. Lead has traditionally been used for roof coverings.
* * *Introductionuseful and decorative objects fashioned of various metals, including copper, iron, silver, bronze, lead, gold, and brass. The earliest man-made objects were of stone, wood, bone, and earth. It was only later that humans learned to extract metals from the earth and to hammer them into objects. Metalwork includes vessels, utensils, ceremonial and ritualistic objects, decorative objects, architectural ornamentation, personal ornament, sculpture, and weapons.General processes and techniquesMany of the technical processes in use today are essentially the same as those employed in ancient times. The early metalworker was familiar, for example, with hammering, embossing, chasing, inlaying, gilding, wiredrawing, and the application of niello, enamel, and gems.Hammering and castingAll decorative metalwork was originally executed with the hammer. The several parts of each article were hammered out separately and then were put together by means of rivets, or they were pinned on a solid core (for soldering had not yet been invented). In addition, plates of hammered copper (copper work) could be shaped into statues, the separate pieces being joined together with copper rivets. A life-size Egyptian (art and architecture, Egyptian) statue of the pharaoh Pepi I in the Egyptian museum, Cairo, is an outstanding example of such work.After about 2500 BC, the two standard methods of fabricating metal—hammering and casting—were developed side by side. The lost-wax (lost-wax process), or cire perdue (casting with a wax mold), process was being employed in Egypt by about 2500 BC, the Egyptians probably having learned the technique from Sumerian (Sumer) craftsmen (see sculpture). Long after the method of casting statues in molds with cores had superseded the primitive and tedious rivetting process, the hammer continued as the main instrument for producing art works in precious metals. Everything attributable to Assyrian (Assyria), Etruscan, and Greek goldsmiths was wrought by the hammer and the punch.Embossing (or repoussé) is the art of raising ornament in relief from the reverse side. The design is first drawn on the surface of the metal and the motifs outlined with a tracer, which transfers the essential parts of the drawing to the back of the plate. The plate is then embedded face down in an asphalt block and the portions to be raised are hammered down into the yielding asphalt. Next the plate is removed and re-embedded with the face uppermost. The hammering is continued, this time forcing the background of the design into the asphalt. By a series of these processes of hammering and re-embedding, followed finally by chasing, the metal attains its finished appearance. There are three essential types of tools (tool)—for tracing, for bossing, and for chasing—as well as a specialized tool, a snarling iron or spring bar, which is used to reach otherwise inaccessible areas. Ornament in relief is also produced by mechanical means. A thin, pliable sheet of metal may be pressed into molds, between dies, or over stamps. All of these methods have been known from antiquity.Chasing is accomplished with hammer and punches on the face of the metal. These punches are so shaped that they are capable of producing any effect—either in intaglio (incising beneath the surface of the metal) or in relief—that the metalworker may require. The design is traced on the surface, and the relief may be obtained by beating down the adjacent areas to form the background. Such chased relief work sometimes simulates embossed work, but in the latter process the design is bossed up from the back. The detailed finish of embossed work is accomplished by chasing; the term is applied also to the touching up and finishing of cast work with hand-held punches.To engrave is to cut or incise a line. Engraving is always done with a cutting tool, generally by pressure from the hand. It detaches material in cutting. When pressure is applied with a hammer, the process is called carving.Inlaying (inlay)The system of ornamentation known as damascening is Oriental in origin and was much practiced by the early goldsmiths of Damascus; hence the name. It is the art of encrusting gold wire (sometimes silver or copper) on the surface of iron, steel, or bronze. The surface upon which the pattern is to be traced is finely undercut with a sharp instrument. The gold thread is forced into the minute furrows of the cut surface by hammering and is securely held.niello is the process of inlaying engraved ornamental designs with niello, a silver sulfide or mixture of sulfides. The first authors to write on the preparation of niello and its application to silver were Eraclius and Theophilus, in or about the 12th century, and Benvenuto Cellini (Cellini, Benvenuto), during the 16th. According to each of these authors, niello is made by fusing together silver, copper, and lead and then mixing the molten alloy with sulfur. The black product (a mixture of the sulfides of silver, copper, and lead) is powdered; and after the engraved metal, usually silver, has been moistened with a flux (a substance used to promote fusion), some of the powder is spread on it and the metal strongly heated; the niello melts and runs into the engraved channels. The excess niello is removed by scraping until the filled channels are visible, and finally the surface is polished.Enamelling (enamelwork)There are two methods of applying enamel (porcelain enamelling) to metal: champlevé, in which hollows made in the metal are filled with enamel; and cloisonné, in which strips of metal are applied to the metal surface, forming cells, which are then filled with enamel. (For a detailed discussion, see the article enamelwork.)Stephen Vincent GrancsayGildingGilding is the art of decorating wood, metal, plaster, glass, or other objects with a covering or design of gold (goldwork) in leaf or powder form. The term also embraces the similar application of silver, palladium, aluminum, and copper alloys.The earliest of historical peoples had masterly gilders, as evidenced by overlays of thin gold leaf on royal mummy cases and furniture of ancient Egypt. From early times, the Chinese ornamented wood, pottery, and textiles with beautiful designs in gold. The Greeks not only gilded wood, masonry, and marble sculpture but also fire-gilded metal by applying a gold amalgam to it and driving off the mercury with heat, leaving a coating of gold on the metal surface. From the Greeks, the Romans (ancient Rome) acquired the art that made their temples and palaces resplendent with brilliant gilding. Extant examples of ancient gilding reveal that the gold was applied to a ground prepared with chalk or marble dust and an animal size or glue.Beating mint gold into leaves as thin as 1⁄280,000 inch (0.00001 centimetre) is done largely by hand, though machines are utilized to some extent. After being cut to a standard 37/8inches (9.84 centimetres) square, the leaves are packed between the tissue-paper leaves of small books, ready for the gilder's use.The many substances to which the gilder can apply his art and the novel and beautiful effects he can produce may require special modifications and applications of his methods and materials. Certain basic procedures, however, are pertinent to all types of gilding. For example, the ground to be gilded must be carefully prepared by priming. Flat paints, lacquers, or sealing glues are used, according to the nature of the ground material. Metals subject to corrosion may be primed (and protected) by red lead or iron oxide paints. With pencil or chalk the gilder lays out his design on the ground after the ground has been prepared and is thoroughly dry. Patterns may also be laid down by forcing, or pouncing, powdered chalk or dry pigment through paper containing perforations made with pricking wheels mounted on swivels; the swivel arrangement permits the attainment of the most intricate of designs.To create an adhesive surface to which the gold will be securely held, the area to be gilded is sized (sizing). The type of size used depends on the kind of surface to be gilded and on whether it is desirable for the size to dry quickly or slowly. When the size has dried enough so that it just adheres to the fingertips, it is ready to receive and retain the gold leaf or powder.Gold leaf may be rolled onto the sized surface from the tissue book. Generally, however, the gilder holds the book firmly in his left hand with the tissue folded back to expose as much leaf as is needed and detaches that amount with a pointed tool, such as a sharpened skewer. He then picks up the leaf segment with his gilder's tip, a brush of camel's hair set in a thin cardboard holder, and carefully transfers it to its place in his design. The leaf is held to the tip by static electricity, which the gilder generates by brushing the tip gently over his hair. For some gilding operations the gilder uses a cushion to hold his pieces of leaf. This is a rectangular piece of wood, about 9 by 6 inches (23 by 15 centimetres) in size, which is padded with flannel and covered with dressed calfskin; a parchment shield around one end protects the delicate leaf from disturbance by drafts of air. When the gilding is completed, the leaf-covered area should be pounced with a wad of soft cotton of surgical grade. Rubbing with cotton burnishes the gold to a high lustre. Application of a gilder's burnisher—that is, a highly polished agate stone set in a handle—also imparts a fine, high finish to the metal. Loose bits of gold, or skewings, may be removed from the finished work with a camel's hair brush.Leaf gold may be powdered by being rubbed through a fine-mesh sieve. Powdered gold is so costly, however, that bronze powders have been substituted almost universally for the precious metal. When gold leaf is employed in the gilding of domes and the roofs of buildings, it is used in ribbon form. For finishing processes, such as burnishing and polishing, see sculpture.Ellen Louise YoungWestern metalworkCopperThe first nonprecious metal to be used by man was copper. But in the 4th millennium BC, Eastern craftsmen discovered that copper alloys using tin or zinc were both more durable and easier to work with, with the result that from then on the use of unalloyed copper declined sharply. Artists and craftsmen working in the West also discovered this, which is why pure copper work was relatively rare.Pure copper is a reddish colour and has a metallic glow. When it is exposed to damp, it becomes coated with green basic copper carbonate (incorrectly known as verdigris). This patina is a drawback if copper is to be used for functional objects, for the oxide is poisonous to man. This means that utensils that come into contact with food must be lined with tin.As copper is a relatively soft metal, it is sensitive to such influences as stress and impact. But unlike bronze it is malleable and can be hammered and chased in much the same way as silver. The surface of copper can be successfully gilded, and its reddish colouring makes the gilding seem even brighter. Because of these properties, copper was sometimes able to compete somewhat with silver.Pure copper is not particularly good for casting, as it can easily become blistered when the gases escape. The surface of sheet copper can be engraved, however, and this technique was often used for decorating purely ornamental objects. In copperplate etching, engraving became the basis of printing. Enamel is often applied to copper, using both the champlevé and cloisonné techniques. Sheet copper was also used as a base for painted enamel.Hanns-Ulrich HaedekeIn the museum at Baghdad, in the British Museum, and in the University of Pennsylvania at Philadelphia are finely executed objects in beaten copper from the royal graves at Ur (modern Tall al-Muqayyar) in ancient Sumer. Outstanding is a copper relief that decorated the front of the temple at al-ʿUbaid. This remarkable decoration represents an eagle with a lion's head, holding two stags by their tails. The stags' antlers—also made of wrought copper—were developed in high relief and were soldered into their sockets with lead. This relief illustrates the high level of art and technical skill attained by the Sumerians in the days of the 1st dynasty of Ur (c. 2650–2500 BC). In the Metropolitan Museum of Art, New York City, is a Sumerian bull's head of copper, probably an ornamental feature on a lyre, which is contemporary with the Ur finds.The malleability of unalloyed copper, which renders it too soft for weapons, is peculiarly valuable in the formation of vessels of every variety of form; and it has been put to this use in almost every age. Copper domestic vessels were regularly made in Sumer during the 4th millennium BC and in Egypt a little later.From whatever source Egypt may have obtained its metalworking processes, Egyptian work at a remote period possesses an excellence that, in some respects, has never been surpassed. Throughout Egyptian history, the same smiths who worked in the precious metals worked also in copper and bronze.Nearly every fashionable Egyptian, man or woman, possessed a hand mirror of polished copper, bronze, or silver. Copper pitchers and basins for hand washing at meals were placed in the tombs. An unusual example in the Metropolitan Museum of Art is plated with antimony to imitate silver, which was very rare in the Old Kingdom (c. 2686–c. 2160 BC). The basins and the bodies of the ewers were hammered from single sheets of copper. The spouts of the ewers were cast in molds and attached to the bodies by means of copper rivets or were simply inserted in place and crimped to the bodies by cold hammering.Stephen Vincent GrancsayThe first well-designed copper objects to survive in the West date from about the middle of the Carolingian period, the 8th century AD. Who made them is not known, but one can assume that in the early Middle Ages they were mainly the work of monks. Indeed, the earliest copper and copper-gilt pieces are exclusively liturgical implements.Decrees issued by the church synods held in the 8th and 9th centuries invariably expressly prohibited the use of copper and bronze for consecrated chalices (chalice), but in fact a few copper-gilt chalices like the “Tassilo Chalice” (Kremsmünster Abbey, Austria) have survived. The care and artistry with which they were worked and their rich engraved and niello decoration show that they were valued as highly as altar vessels made of precious metals.From the 12th century onward, but particularly in the 13th and 14th centuries, copper-gilt chalices were relatively common, especially in Italy, where they were virtually mass-produced. Reliquaries, portable altars, shrines, and processional crosses dating from the Ottonian and Romanesque periods are also very frequently made of gilded copper and are generally decorated with enamel, niello work, or engraving or set with precious stones. One group of copper-gilt reliquaries, dating from the 12th century and after, takes the form of the head, or head and shoulders, of a saint. Others are in the shape of various parts of the body, such as an arm or a foot. These were also made in silver and in cast bronze. Ciboria (ciborium) (covered vessels for holding the wafers of the Eucharist), monstrances (monstrance) (receptacles for the Host), incense vessels, and other liturgical implements were also made in copper gilt, as well as in bronze and silver. Some of these copper-gilt implements were made as late as the Baroque period.Hanns-Ulrich HaedekeIslāmThe most magnificent example of Muslim enamel work in existence is a copper plate in the Tiroler Landes museum Ferdinandeum at Innsbruck, Austria, decorated in polychrome enamel, with figure subjects, birds and animals within medallions separated by palm trees and dancers (first half of the 12th century). The Mesopotamian, or Mosul (Mosul school), style, which flourished from the early part of the 13th century, is characterized by a predominant use of figures of men and animals and by the lavish use of silver inlay. The most famous example of figured Mosul work in Europe is the so-called Baptistery of St. Louis in the Louvre. This splendid bowl, which belongs in style to the Mosul work of the 13th century, measures five feet (150 centimetres) in circumference and is covered with figures richly inlaid with silver, so that little of the copper is visible. It is signed by the artist.Stephen Vincent GrancsayRenaissance to modernIn the second half of the 16th century, copper gilt began to be used less and less often for liturgical implements because silver had become cheaper and was therefore preferred.In the late 16th century, Italian smiths used copper for water beakers and water jugs, decorating the surfaces with chased ornaments, whereas the rest of Europe used brass.High-quality copper objects dating from the 17th and 18th centuries were sometimes designed and worked in the same way as the silver of the period. Most were probably trial pieces made for the guild rank of journeyman or master by silversmiths who were too poor to supply objects in precious metal. Some may have been used as workshop models or given to clients as specimen pieces.Another type of copper vessel, known as a “Herrengrund cup,” is purely ornamental and resembles the showpieces made in the 16th and 17th centuries. These mugs are made of copper that was extracted by a process known as cementation, in which water containing copper forms a deposit on iron. Production was limited to three places in the county of Sohl in Hungary. In those days the process seemed mysterious to many people; many of the inscriptions on “Herrengrund cups” refer to this mystery. The design of the beakers is modelled closely on that of silver vessels produced in southern Germany, Bohemia, and Silesia. The best examples are chased, engraved, or gilded or, more rarely, enamelled or set with precious stones. Many of them are decorated with mining scenes peopled with little figures. Most were made in the 17th century; a decline set in in the 18th century, though individual pieces continued to be made until the Empire period.In the 17th and 18th centuries, copper enjoyed a period of relative prosperity in middle class households on the continent of Europe. For example, copper bread bins lined with tin were used; they were often richly decorated with chased motifs or brass fittings. There were also sumptuous wine coolers, cake and pudding molds, bowls, buckets, jugs, jars, screw-top flasks, sausage pans, and many other items, all polished until they shone and thus used as kitchen decorations as well as utility items.In 18th-century Holland (Netherlands, The), jugs for tea and coffee were made in copper with a dark-brown patina and with various parts, such as the handle and the knob, in brass gilt. The sides were chased with interlaced foliage and other Rococo decorative motifs.Copper was also the main metal used for Sheffield plate, which has a silvered surface. In 1742 Thomas Bolsover (Boulsover, Thomas) invented a method of fusing copper and silver together so that the result was highly durable, and he produced this type of silver-plated ware on a large scale. Although 18th-century England was a relatively wealthy society and solid silver utensils of all kinds were used fairly widely, the middle classes, who were not all that well off, liked to buy these implements that looked like silver yet cost only a third of the price. The makers of Sheffield plate therefore adopted the designs used for English silverware at that date, and their work was often as courtly and elegant as that of the silversmiths.Copper ware was no longer important in the 19th century, though it was occasionally used for pieces designed to follow earlier styles or for copies of historical pieces. The method now used was electroplating, which is a purely technical process and has nothing to do with craftsmanship.Toward the end of the 19th century, attempts were made to create a new and individual style for copper; and there were occasional signs that its inherent properties were understood and used to full effect. But there was no renaissance in the true sense of the word.Bronze (bronze work) and brassBronze is an alloy of copper and tin. In the period of classical antiquity it had a low tin content, generally containing less than 10 percent, because tin was less common and therefore difficult to obtain. Like bronze, brass is an alloy, this time of copper plus zinc.It is often very difficult to distinguish between bronze and brass merely by their appearance. The colour of the different alloys ranges over various shades from gold to a reddish tinge, to silvery, greenish, and yellowish shades, according to the proportions of the basic constituents. The patina on both alloys ranges from dark brown to a dark greenish tinge, particularly in the earliest pieces. Since it is often difficult to differentiate between bronze and brass with the naked eye and since metalworkers and metal casters of previous centuries did not make an express distinction between them, they will be considered together here. From a very early date bronze was used mainly for casting. Because it is so brittle, it has only rarely been hammered or chased; brass or copper were preferred for such work because they are more malleable. Down to the Middle Ages, bronze was cast by the cire perdue, or lost-wax, method (lost-wax process). By this process, the mold can be used only once. This method of casting is the most exclusive, not only because it is the most expensive but also because it produces the finest work from the aesthetic point of view. Later, the casting process used models made up of a number of different pieces that could be taken apart and therefore re-used. These were generally made of wood and could be pressed down into a sand mold so that the shape of the object being cast emerged as a hollow. The hollow was then filled with molten bronze, which was poured in through casting ducts. When the resulting piece had been removed from the sand mold, the surface was smoothed over and the casting seams removed. The wooden model could then be used again to make as many copies as were required, which meant that economical production was possible. Brass was cast by the same methods but over and above this a process of hammering and chasing was used to fashion sheet brass. Brass platters were often decorated with relief work ornament, which was embossed from the reverse side by means of a type of die. The brass worker could also create an ornamental frieze made up of small motifs by using a series of punches made of iron. The surface of bronze or brass objects was also occasionally decorated with engraving.Hanns-Ulrich HaedekeIn the Metropolitan Museum of Art is the bronze sword of King Adad-nirari I, a unique example from the palace of one of the early kings of the period (14th–13th century BC) during which Assyria first began to play a prominent part in Mesopotamian history. A magnificent example of Assyrian bronze embossed work is to be seen in the gates of Shalmaneser III (858–824 BC), erected to commemorate that king's campaigns. The gates were made of wood; and the bronze bands, embossed with a wealth of figures in relief, are only about 1/16 inch (1.6 millimetres) thick. The bands were obviously intended for decoration, not to strengthen the gates against attack.The Persian bronze industry was also influenced by Mesopotamia. Luristan (Luristan Bronze), near the western border of Persia (art and architecture, Iranian) (Iran), is the source of many bronzes that have been dated from 1500 to 500 BC and include chariot or harness fittings, rein rings, elaborate horse bits, and various decorative rings, as well as weapons, personal ornaments, different types of cult objects, and a number of household vessels. Many of these objects show a decided originality in the development of the animal style.The bronzes that have survived are mainly votive statues placed in the temples from the Saite to the Ptolemaic period (305–30 BC), and amuletic bronzes that were buried with the dead. In its simplest form the decoration consisted of lines, representing details of clothing, ornaments, and the like, cut in the bronze with engraving tools, sometimes also combined with gilding. A fine example of inlay work of the 22nd dynasty (945–c. 730 BC) is a bronze menat damascened with gold wire (Metropolitan Museum of Art).A sword, found in the palace of Mallia and dated to the Middle Minoan (Minoan civilization) period (2000–1600 BC), is an example of the extraordinary skill of the Cretan metalworker in casting bronze. The hilt of the sword is of gold-plated ivory and crystal. A dagger blade found in the Lasithi plain, dating about 1800 BC (Metropolitan Museum of Art), is the earliest known predecessor of ornamented dagger blades from Mycenae (Aegean civilizations). It is engraved with two spirited scenes: a fight between two bulls and a man spearing a boar. Somewhat later (c. 1400 BC) are a series of splendid blades from mainland Greece, which must be attributed to Cretan craftsmen, with ornament in relief, incised, or inlaid with varicoloured metals, gold, silver, and niello. The most elaborate inlays—pictures of men hunting lions and of cats hunting birds—are on daggers from the shaft graves of Mycenae, Nilotic scenes showing Egyptian influence. The bronze was oxidized to a blackish-brown tint; the gold inlays were hammered in and polished and the details then engraved on them. The gold was in two colours, a deeper red being obtained by an admixture of copper; and there was a sparing use of neillo.The Greeks, who learned much about metalwork from the Egyptians, excelled in hammering, casting, embossing, chasing, engraving, soldering, and metal intaglio. Among the ancients, the great emphasis of technology was on aesthetic expression, not on practical utilization. Greek coin dies rank with the finest work of this kind that the world has ever seen. Pottery and bronze hammer-and-cast work were important crafts of ancient Greece. Vases of terra-cotta were often designed to resemble those of bronze, and both kinds were widely used in antiquity. Unlike terra-cotta, which is breakable but otherwise practically indestructible, bronze is subject to corrosion; and a surviving Greek bronze vase in good condition is therefore something of a rarity. The body of the vase, which was hammered out of a sheet of malleable bronze, was usually left plain; the handles, feet, and overhanging lip, which were cast, were decorated. The applied elements were rivetted or soldered.It was in the time of Lysippus, the distinguished sculptor who flourished about 330 BC, that the fine Greek beaten work for decoration of armour, vases, and objects of domestic use reached its perfection. It was executed by a hammer worked from behind, the outlines being afterward emphasized by chisel or punch; or metal plate was beaten into a mold formed by carving the subject in intaglio upon a resisting material. The embossed shoulder straps of a cuirass, called the “Bronzes of Siris” (4th century BC; British Museum, London), are in exceedingly high relief and are beaten into form with wonderful skill with the hammer. The relief depicts the combat between the Greeks and the Amazons.Greek bronze statuettes—originally dedicatory offerings in shrines, ornamental figures on utensils, or decorative works of art—have survived in large numbers. They were usually cast solid, rarely hollow. Sometimes even large statuettes were cast solid. (The advantage of solid casting is that the mold can be used repeatedly, whereas in the hollow-casting process the mold is destroyed.) Greek bronzes were originally golden and bright, and they were often decorated with silver or niello for colour contrast. Bronze statuary hardly existed before the introduction of hollow casting, about the middle of the 6th century BC, after which bronze became the most important medium of monumental sculpture; its strength and lightness admitted poses that could not be reproduced in stone.The Etruscans used bronze for cast and beaten work; and although few large works remain, the museums of Europe display a marvellous variety of admirably formed small bronzes. A masterpiece of bronze Etruscan sculpture is the “ Chimera” (a mythological beast with a goat's body, a lion's head, and a serpent's tail) from Arezzo, a 5th-century BC ex-voto from a sacred building, found in 1553 and partly restored by Benvenuto Cellini (Museo Archeologico di Firenze). Etruscan bronze workers produced, often for export, votive statuettes, vessels, furniture, helmets, swords, lamps, candelabra, mirrors, and even chariots. An Etruscan chariot of c. 600 BC in the Metropolitan Museum of Art has a body and wheels of wood, sheathing of bronze, and tires of iron, the high front embossed with archaic figures of considerable grace. The Etruscans inlaid bronze with silver and gold in a manner that proves that their skill in this mode of enrichment equalled that of the Greeks and Romans. Many delicately engraved bronze objects were made in the Latin town of Praeneste (modern Palestrina), which possessed a highly developed bronze-working industry. From Praeneste came a remarkable cylindrical container of the late 4th century BC, now in the Villa Giulia, Rome; its richly engraved surface provides a good example of the perfection of ancient drawing.Etruscan cities, like those of Greece, were crowded with bronze statues of gods and heroes; and Rome derived its best adornment from the pillage of Etruria and then of Greece. Distinctly Roman work is hard to trace, as the conquered Greeks worked for their masters, and the Romans copied wholesale from the Greeks. Temple statues were nearly always of bronze (bronze work), but after about 190 BC the metal was chiefly used for architectural decorations and portraiture. The bronze doors of the Pantheon and of the Temple of Romulus in the Roman Forum still occupy their original positions. Two bronze doors in the Lateran Baptistery are supposed to have been brought from the Baths of Caracalla by Pope Hilarius in the 5th century. Also in the Lateran church are four fine gilt-bronze fluted Corinthian columns.Much Roman small work was exceedingly fine, though it is generally conceded that Roman productions are less aesthetically attractive than those of the Greeks. Pompeii and Herculaneum were essentially Greek towns, and the many beautiful bronzes in the Museo e Gallerie Nazionali di Capodimonte, Naples, collected from the ruins of private houses there, are of Greek workmanship. These included statuettes, mirrors, and all kinds of bronze work useful in a house. Many of these pieces were originally attached to pieces of furniture.During the closing years of the republic, brass, produced by what came later to be known as the calamine (calamine brass) (zinc-carbonate) method, became an important material for the first time. Its various uses included parade armour, as may be seen in a Roman embossed brass helmet in the Castle Museum, Norwich, England.Teutonic tribesThe Teutonic tribes who conquered and divided the Roman Empire (ancient Rome) were little versed in the monumental arts and unskilled in figure representation; but in metalworking, in the making of weapons and other utilitarian objects, and in the delicate ornament of the goldsmith's art they excelled. They were among the earliest in Western Europe to develop the use of enamel decoration on bronze in the champlevé technique.Syria, Egypt, and Anatolia were first the teachers and then the rivals of Constantinople (Istanbul). The fusion of antique and Eastern elements resulted in the Byzantine style, the great period of which dates from the 9th to the end of the 12th century. The extensive use of embossed work, with filigree, cabochon gems, and small plaques of enamel, may be seen in both the East and the West during the early Middle Ages. The most conspicuous examples of large Byzantine metalwork are bronze church doors inlaid with silver. Many objects are still preserved in various European treasuries, which were enriched by the spoils of the sack of Constantinople in 1204. Venice, in the Treasury of St. Mark (San Marco Basilica)'s, has an unrivalled series of Byzantine chalices, bookbindings, and other treasures of metalwork; but it is in Kiev, Moscow, and Leningrad that broadly representative series of all the categories of Byzantine artistic production may be found.The art of bronze casting had been preserved in the Byzantine Empire. The first bronze doors to be made after the art had died out in Rome were those for Hagia Sophia at Constantinople, which bear the date 838; the panels, with monograms and other ornament damascened in silver, are framed in borders cast in relief and enriched with bosses and scrolls, the whole in an admirable style. Two sets of doors in St. Mark's, Venice, of Greek workmanship and considerable but uncertain antiquity, are supposed by some to have been removed from St. Mark's at Alexandria. Next in date among surviving doors of Byzantine workmanship is a series ordered by the Pantaleone family (about 1066–87) and destined for cities in southern Italy—Amalfi, Trani, Salerno, Canosa di Puglia, and Monte Sant'Angelo.Stephen Vincent GrancsayAnimals in the Sāsānian (Sāsānian dynasty) style—lions, dragons, sphinxes, peacocks, doves, cocks, and the like—were cast in bronze in three dimensions and served, like their ceramic counterparts, as basins, braziers, and so on. They were particularly sought after in the later Abbāsid, Fātimid, and Seljuq periods, and from Egypt they became prototypes of similar European forms. It was the Seljuqs, apparently, who introduced a round bronze mirror, the reverse of which shows in low relief two sphinxes face to face, surrounded by a twined pattern, or two friezes with the astrological symbols of the seven chief heavenly bodies (Sun, Moon, and the five nearest planets) and the 12 signs of the zodiac, surrounded by a band of script; this goes back ultimately to Chinese origins.Early vessels, such as mugs, were ornamented with animals in low relief, but engraving quickly supplanted this. Under the later Seljuqs (particularly the Artuqid (Artuqid Dynasty) atabegs of Mosul) and the Mamlūks (Mamlūk), engraving became almost the only form of decoration, but only to serve as a basis for the yet richer technique of inlaying, or damascening: (damascening) small silver plates and wires, themselves delicately engraved, were hammered into the ribs and surfaces, which were hollowed out and undercut at the edges.In place of this, in an Artuqid bowl in the provincial museum at Innsbruck the spaces are filled in with cellular enamel (enamelwork). This was a method of evading the prohibition of precious metals, just as gold lustre was in pottery. The ornament consisted of friezes and medallions in lattice work and arabesque work, the interstices being filled with figures of warriors, hunters, musicians, animals, and astrological symbols. These were superseded later by Mamlūk coats of arms and inscriptions. In the 15th century the technique was imported from Syria to Venice, where productions of the same kind, alla damaschina or all'azzimina, were made right into the 16th century by Islāmic masters and were in great demand. In the East the process is still common, but both technically and artistically it has decayed.In the 15th century there was a renaissance of pure metal engraving, but the design—inscriptions and arabesques in the Tīmūrid and Ṣafavid styles—was not cut into the material but left free in the manner of a relief, the background being etched in black. Decoration was applied to bowls, basins, mugs, vases, mortars, braziers, warming pans, candlesticks, smoking utensils, inkstands, jewel cases, Qurʾān holders, and mosque lamps. These are generally in the simplest possible forms—spherical, cylindrical, prismatic; the subjects include motifs of vegetation and animal life, the former mainly in the necks and feet of vessels, the latter for handles and ears, feet, and sometimes small spouts.Hermann GoetzEurope from the Middle AgesAfter several centuries of artistic decline, the art of bronze casting was revived in c. 800 by Charlemagne (Carolingian art), who had monumental bronze portals made for the Palatine Chapel in his residence in Aachen, with bronze grilles placed inside it. The artists, who probably came from Lombardy, followed the styles of classical antiquity.For many centuries the Christian Church remained the bronze caster's chief patron. Like the stonemasons, who also were heavily patronized by the church, they joined together to form associations, or foundries. These casting foundries hired themselves out to the large ecclesiastical building sites. They cast bells—almost every church had at least one bell—and monumental doors decorated with relief work; for instance, doors for Mainz (c. 1000) and Hildesheim (1015) cathedrals, for the cathedrals at Gneissen and Augsburg (11th century), and for St. Zeno Maggiore in Verona (12th century). They also made large fonts, the most famous being the one made by Renier de Huy in 1107–18 for the church of Notre Dame aux Fonts in Liège (now in the church of St. Barthélemy in Liège). The Dinant workshops, which formed the main centre for bronze casting in the Meuse district in the Middle Ages, specialized in what are known as “eagle lecterns.” These are book stands with ornamental pedestals, with the panel supporting the enormous missals taking the form of the outspread wings of an eagle, a griffin, or a pelican. The earliest documented eagle lectern was made in 965, but the earliest example to have survived dates from 1372. It was made by Jean Joses of Dinant for the Church of Our Lady at Tongeren (Tongres), near Liège.Records show that from the 11th to the 15th century there were more than 50 monumental seven-branched candlesticks ( menorah) in various churches in Germany, England, France, Bohemia, and Italy, though only a few of these have survived. Documents relating to the Carolingian period speak of monumental bronze crucifixes and statues of the Virgin and of the saints, though the earliest surviving statues date from the 11th century; the crucifix in the abbey church at Werden, for example, dates from c. 1060 and was probably cast in a foundry in Lower Saxony.Among the most outstanding examples of figurative bronze sculpture dating from the Romanesque (Romanesque art) period are a group of reliquaries designed in the shape of heads or heads and shoulders or occasionally arms, hands, or feet, according to the type of relics they contain. They were made in Lower Saxony or in France.A few large chandeliers (chandelier) have survived from the 11th and 12th centuries, representing a sort of halfway stage between sculpture and functional objects. A far larger number are known to have existed from documents and contemporary accounts, but these have disappeared over the centuries. Examples from Germany, the southern half of the Low Countries, and France have survived or are documented. Romanesque chandeliers are always designed in the form of a crown. Candleholders, with architectonic structures and figures placed in between them, project from the crown.Besides the monumental bronzes that have survived from the 8th to the 12th century, there are also a number of smaller pieces, such as processional crosses, altar crucifixes, chests, reliquaries, and similar articles. Another group of liturgical objects consists of candlesticks used to adorn altars. Their design often shows a wealth of invention, and they are decorated in the most sumptuous fashion. There was yet another group of candlesticks, which were secular in nature, that embodied the ideal of chivalry. They are cast in the shape of human figures: an armed warrior on horseback bearing a candleholder with a spike on which the candle is placed; a kneeling page in court dress holding a candle socket in his outstretched hands; or Samson perched on the lion's back, brandishing a candleholder. These candlestick figures are rare and precious examples of courtly life in the Romanesque period in Germany, France, England, and Scandinavia. Even at that time they were thought of as rare, deluxe articles within the reach of only a few privileged people.Toward the end of the Romanesque period a simpler type of candlestick appeared, mainly intended for religious purposes, though they were found in private homes as well. They are circular, with a round base, a slender column-like shaft, and a large grease pan with a spike for the candle. This design exercised a strong influence throughout the Gothic period and right down to the Baroque period, though it varied considerably over the years according to the styles then prevailing.Some of the finest bronze articles of the High Middle Ages were modelled on Oriental pieces brought back from the Holy Land by the crusaders. They are known as aquamaniles, a type of ewer used for pouring water for washing one's hands. Made by bronze casters in France, Germany, England, and Scandinavia, they are usually in the shape of lions—symbols of valour, pride, physical strength, and power. Also common are those shaped like knights in armour, with a wealth of courtly detail that was obviously popular. A few aquamaniles are in the shape of winged dragons, doves, cockerels, centaurs, or sirens; but such designs are rare. Christian themes, too, played a part, some examples depicting Samson overcoming the lion with his knee planted on its back. The golden age of these vessels was the 12th, 13th, and 14th centuries. The end of the age of chivalry also saw a decline in such work, for the emergent bourgeoisie found other ways of marking the ceremony of hand washing.Basins were also needed for washing one's hands; they are often mentioned in medieval documents, where they are referred to as bacina, pelves, or pelvicula. The majority of these bowls—which date from the 12th and 13th centuries—have been found in the cultural area that extends from the Baltic down to the Lower Rhine district and across to England. Because this area was once dominated by the Hanseatic League (a commercial association of free towns), the basins are known as Hanseatic bowls. They are round, some being more convex than others; and the inside is engraved with scenes from classical mythology, with themes from the Old and New Testaments and the legends of the saints, or with allegorical figures personifying the virtues and the vices, the liberal arts, the seasons, and so on. Hanseatic bowls were probably made in the bronze-casting centres where candlesticks and aquamaniles (and indeed all medieval cast bronze) were made: in the Meuse district and Lorraine, in Lower Saxony and the Harz Mountains, and also in England. The decoration on these bowls may have been added elsewhere.In the Romanesque period and later, in the Gothic period, the churches and their patrons were still the bronze caster's main clients, ordering both functional objects and decorative pieces. Bronze fonts were relatively common in the 14th and 15th centuries, particularly in churches in northern Germany. Another common item, which was made mainly in England and in the Netherlands, was a large brass tombstone decorated with engraving. Other objects included door fittings, candlesticks, candelabra, chandeliers, pulpits, and sculptured tombs portraying the deceased.Until the 12th century in Italy the art of bronze (bronze work) casting had been virtually neglected since the period of classical antiquity, when it had been a flourishing industry. A few churches in Italy have bronze doors inlaid with Byzantine niello work made by Byzantine craftsmen in the 11th and 12th centuries. The same technique was used by Bohemond I of Antioch for a bronze door at Canosa (1111) and by Oderisius of Benevento when casting a pair of doors for Troia Cathedral in 1119 and 1127. In the second half of the 12th century, however, Barisano da Trani made relief door panels for churches in Astrano, in Ravello (a town near Amalfi), and in Monreale. Bronze relief doors were also made in the 12th century for S. Paolo fuori le mura in Rome and for churches in northern Italy (S. Zeno Maggiore in Verona; St. Mark's in Venice) and Tuscany (Pisa and Monreale, by Bonanno of Pisa) and in the 13th century for the Baptistery in Florence, by Andrea Pisano (Pisano, Andrea).Lorenzo Ghiberti's (Ghiberti, Lorenzo) doors for the Baptistery (Gates of Paradise) in Florence, made in 1403–24 and 1425–52, marked the beginning of a golden age of bronze casting in Florence that lasted throughout the Renaissance and right down to the Baroque era. Whereas bronze sculpture had been relatively rare before the 15th century, many Italian artists of the Renaissance now designed cast bronze statues, statuettes, reliefs, and various objects in the shape of human figures. Among the sculptors who worked in full-scale bronzes were Lorenzo Ghiberti, Donatello, Andrea del Verrocchio, Antonio Pollaiuolo, and Lucca della Robbia. Besides large-scale cast-bronze work there were also small figures, statuettes, busts, plaques, and functional objects such as candelabra, mortars, candlesticks, and inkwells. Dating from the middle of the 15th century onward, they are characterized by rich figural and ornamental design. Their style influenced work produced in northern Europe, particularly in the 16th century.In the first half of the 16th century, bronze casting declined somewhat in Italy, though it found a new lease on life in the middle of the century and, indeed, became even more important than before. Benvenuto Cellini and Giovanni da Bologna (Giambologna) are two of the most famous artists of this period. Cellini designed a number of statues, one of the best known being his “Perseus” in the Loggia dei Lanzi in Florence, as well as portrait busts, reliefs, and smaller articles in bronze. Giovanna da Bologna, a Fleming by birth, was active in Rome and Florence, where he made fountains, equestrian monuments, allegorical figures, crucifixes, statuettes, groups of figures, animals, and many other objects. He founded a school of sculptors who were influenced by his work for many years. Many other bronze sculptors were active in the 16th and 17th centuries, notably in Venice, which was a particularly fruitful area for bronze casting, and at a school in Padua led by Andrea Riccio (Briosco). Italian bronze casters worked abroad as well as in their homeland, working on commission for foreign potentates, mainly in France and England.In the 16th century, beautifully made bronze pieces, which were very much more than functional objects, played an important part in the art of the bronze caster. For instance, sumptuous mortars were designed and made by artists whose names have been handed down to posterity, such as Cavadini, Lenotti, Juliano da Navi, Alessandro Leopardi, Antonio Viteni, and Crescimbeni da Perugia. Elaborate brass dishes were made in Venice, under the influence of Eastern art (to which Venice had always been very receptive); indeed, the first people to produce these large dishes with engraved motifs were Islāmic artists who had settled in the town, though the local artists soon adopted both their style and their technique.Germany and the Low CountriesUnlike their Italian counterparts, 15th-century bronze artists in Germany and the Low Countries were still under the spell of Gothic art, and ecclesiastical implements predominated.The Dinant workshops, in the Meuse district, continued to dominate production until well past the middle of the 15th century, just as they had since the days of Charlemagne. But when Philip III the Good, duke of Burgundy, laid siege to the town in 1466, then took it by storm and eventually completely destroyed it, the bronze casters who survived moved elsewhere, settling mainly in the Low Countries. As a result, from that date onward the trade enjoyed a sudden upsurge in Brussels and Namur, in Tournai and Bruges (Flemish Brugges), in Malines (Flemish Mechelen), Louvain (Flemish Leuven), and Middelburg. There was another centre of the bronze trade in Lower Saxony, since the mines in the Harz Mountains produced a generous supply of copper and calamine. The chief bronze-working towns in this area were Hildesheim, Goslar, and Minden. In the 16th century, a period when trade and commerce were developing very rapidly in Germany, the bronze-casting trade was no longer compelled to function close to the place where the raw material was extracted. Thus, Nürnberg, at this time the most powerful and lively town in Germany, not only traded in copper, bronze, and brass but also soon allowed its bronze casters and metalworkers to develop a flourishing industry. Brass articles from Nürnberg became famous throughout the world.The earliest documented brass workers were those known as “basin-beaters” (Beckenschläger), who were first referred to as such in 1373. They made bowls and dishes with various types of relief decoration on the bottom. In the late Gothic period, religious themes were very popular for this decoration and were more common than secular images. During the Renaissance, beginning in about 1520, the design changed; instead of deep bowls there were large, flat dishes with decoration that consists of purely ornamental motifs or friezes as well as scenes and figures. The decoration includes the typically Gothic “fishbladder” design and also interlaced motifs and bands of lettering. The trade of the basin beaters continued to flourish in Nürnberg down to about 1550, when a decline set in, culminating in its eventual collapse just before the Thirty Years' War in 1618. The reason for this decline may have been the emergence of what is known as display pewter (see below Pewter (metalwork)), which, from about 1570 onward, swept the wealthy bourgeoisie market.Until the Gothic era, bronze chandeliers (chandelier) were made solely for the churches; it was not until the 15th century that people began to consider lighting their homes by means of a central source of light hanging from the ceiling. In the Low Countries, one of the centres of the art of bronze casting, a type of chandelier was developed at this time that remained standard for many years. It is a type of hoop with a shaft, made up of a molded vertical centrepiece and a series of curving branches bearing drip trays and spikes. The arms, or branches, are decorated with tracery, foliage scrolls, and other motifs characteristic of the late Gothic style. In the middle of the 16th century, the central shaft took on the shape of a spherical baluster, with a large sphere jutting out just below the point where the curving arms branch off. This design continued to predominate in the Baroque period and is found as late as the 18th century. Because chandeliers of this type were most common in the Low Countries, one can assume that they originated there and were produced in large numbers and that they spread to England and Germany. Another centre was in Poland, presumably because brass founders had moved there from Nürnberg.Besides these chandeliers—which until the 19th century were exclusive to court circles, the aristocracy, and the upper ranks of the bourgeoisie—there were also candlesticks. Their design was a later development of that used for altar candlesticks. The principle of a disk-shaped foot and a baluster shaft with a spike on top remained standard from the Middle Ages well into the 19th century, though the design of the individual components was affected by the styles current in any particular period. In Dinant and Flanders in the 15th century, for instance, the shaft began to be fashioned into the shape of a human figure. This style also became popular in Germany.Whereas bronze sculpture reached its peak in Italy in the 15th century, monumental bronze figures were still rare in northern Europe at this time. Thus, the full-length equestrian statue of St. George (1373) on Hradčany Castle in Prague, which was cast by Martin and Georg von Klausenberg, did not set a trend, though rich figure decoration is often found on large fonts dating from the 13th to the 15th century. Engraved tombstones and entire tombs based on earlier traditions continued to be made until the late Gothic era (the beginning of the 16th century), as did tabernacles and lecterns.The intellectual content of the Renaissance and the styles it engendered entered the world of the northern sculptors in the second decade of the 16th century. The Nürnberg workshop run by the Vischer Family, which had been flourishing since the 15th century, continued to work in the late Gothic style until it had completed the St. Sebald's Shrine (1516), but shortly after this the style and intellectual concepts current in Italy were adopted by bronze casters in northern art centres as well. Small-scale bronze sculpture was particularly popular at this time, though some workshops were still casting monumental bronzes as late as the 18th century.Hanns-Ulrich HaedekeCasting in bronze reached high perfection in England during the Middle Ages. The most remarkable of the sanctuary rings, or knockers, that exist at Norwich and elsewhere is that on the north door of the nave of Durham cathedral, from the first half of the 12th century. The Gloucester candlestick (see photograph—>), in the Victoria and Albert Museum, London, displays the power and imagination of the designer as well as an extraordinary manipulative skill on the part of the founder. According to its inscription, this candlestick, which stands about two feet (60 centimetres) high and is cast in bell metal and gilded, was made for Abbot Peter (the cathedral was originally an abbey church), who ruled early in the 12th century. While the outline is carefully preserved, the ornament consists of a mass of figures of monsters, birds, and men, mixed and intertwined to the verge of confusion. As a piece of casting, it is a triumph of technique.There remain in England 10 effigies cast in bronze over a period of two centuries (1290–1518), among them some of the finest examples of figure work and metal casting to be found in Europe. In several instances, particulars for the contracts of the tombs survive, together with the names of the artists who designed and made them. The earliest examples are the effigies of Queen Eleanor, wife of Edward I (1290), and that of Henry III (1291), both in Westminster Abbey. They are the work of William Torel, goldsmith of London; and it is evident that they are the first English attempt to produce large figures in metal. Torel cast his large figures by the same process (lost-wax) he had employed for small shrines and images.Monumental brasses were exceedingly numerous in England, where some 4,000 still exist. From the 13th through the 16th centuries, in France, northern Germany, Belgium, and particularly England, it became the vogue to set into the stone slab covering a floor tomb a brass plate engraved with the figure of the deceased. The art began in Flanders and Germany, and many of the English brasses were of foreign origin; in some cases, brass sheets were imported and engraved by English artists. The manufacture of unornamented brass plates centred chiefly at Cologne. The oldest English brass in existence is that of Sir John D'Abernon (died 1277) at Stoke d'Abernon, Surrey. Traces can still be seen in many brasses of the colours that originally enlivened them.Stephen Vincent GrancsayIn France, bronze was common from the late 16th century through the 17th, 18th, and 19th centuries, and it is still popular with French sculptors today. Eighteenth-century artists made use of ormolu, or fire gilding, for bronze articles such as candlesticks, brackets, and mounts for furniture. This tradition continued in France and, to a lesser extent, in the areas under French influence, until the Empire period in the early 19th century. Subdued classical designs executed in simple brass or in bronze, generally ungilded, are typical of the period following the reign of Napoleon.The second quarter of the 19th century and, with it, the onset of industrialization, brought about a decline in bronze casting, as it did in all spheres of craftsmanship. The age of steel production now began. At the end of the 19th century, during the Art Nouveau period, attempts were made to revive the craft of casting bronze (bronze work) articles; but these did not have any lasting success. Bronze continued to be used by a few individual sculptors, however, throughout the 19th century and into the present day.Hanns-Ulrich HaedekeGold and silver and their natural or artificial mixture, called electrum or white gold, were worked in ancient Greece and Italy for personal ornaments, vessels, arrows and weapons, coinage, and inlaid and plated decoration of baser metals.Aegean (Aegean civilizations) lands were rich in precious metals. The considerable deposits of treasure found in the earliest prehistoric strata on the site of Troy are not likely to be later than 2000 BC. The largest of them, called Priam's Treasure, is a representative collection of jewels and plate. Packed in a large silver cup were gold ornaments consisting of elaborate diadems or pectorals, six bracelets, 60 earrings or hair rings, and nearly 9,000 beads. Trojan (Troy) vases have bold and simple forms, mostly without ornament; but some are lightly fluted. Many are wrought from single sheets of metal. The characteristic handle is a heavy rolled loop, soldered or rivetted to the body. Bases are sometimes round or pointed, sometimes fitted with separate collars but more often slightly cupped to make a low ring foot. One oddly shaped vessel in gold is an oval bowl or cup with a broad lip at each end and two large roll handles in the middle. The oval body has Sumerian affinities. A plain, spouted bowl in the Louvre is a typical specimen of goldsmith's work from pre-Mycenaean Greece. The scarcity of precious metals points to lack of wealth as prime cause of the artistic backwardness of these regions. Silver seems to have been more plentiful in the Greek islands; but only a few simple vessels, headbands, pins, and rings survive.A profusion of gold jewelry was found in early Minoan burials at Mókhlos and three silver dagger blades in a communal tomb at Kumasa. Silver seals and ornaments of the same age are not uncommon. An elegant silver cup from Gournia belongs to the next epoch (Middle Minoan I, c. 2000 BC). Numerous imitations of its conical and carinated (ridged) form in clay and of its metallic sheen in glazed and painted decoration prove that such vessels were common. Minoan plate and jewelry are amply represented in the wealth of mainland tombs at Mycenae and Vaphio. The vases from Mycenae are made indifferently of silver, gold, and bronze; but drinking cups, small phials, and boxes are generally made only of gold; and jugs are made of silver. Much funeral furniture is gold, notably masks that hid the faces or adorned the coffins of the dead. It has been thought that small gold disks, found in prodigious quantities (700 in one grave), were nailed on wooden coffins; but they may have been sewn on clothes. They are impressed with geometrical designs based on circular and spiral figures, stars and rosettes, and natural forms such as leaves, butterflies, and octopods. Smaller bossed disks bearing similar patterns may be button covers. Models of shrines and other amulets are also made of gold. A splendid piece of plate is a silver counterpart of a black steatite, or soapstone, libation vase from Knossos in the form of a bull's head, with gold horns, a gold rosette on the forehead, and gold-plated muzzle, ears, and eyes. (The gold here and in other Mycenaean plating is not laid on the silver but on inserted copper strips.)Gold cups from Mycenae are of two main types: plain curved or carinated forms related to the silverware and pottery of Troy and embossed conical vessels of the Minoan tradition. Some of the plain pieces, such as the so-called Nestor's cup, have handles ending in animals, which bite the rim or peer into the cup. The embossed ornament consists of vertical and horizontal bands of rosettes and spiral coils and of floral, foliate, marine, and animal figures. The designs are beaten through the walls and are consequently visible on the insides of most of the vessels; but the finest examples of their class, two gold cups from the Vaphio (Vapheio) tomb near Sparta, have a plain gold lining that overlaps the embossed sides at the lip. The reliefs on the Vaphio cups represent men handling wild and domesticated cattle among trees in a rocky landscape. (Steatite vases carved with similar pictorial reliefs were evidently made to imitate embossed gold.) The handles show the typical Minoan form: two horizontal plates rivetted to the body at one end and joined at the other by a vertical cylinder.Cretan and mainland tombs have produced many examples of weapons adorned with gold. Modest ornaments are gold caps on the rivets that join hilt and blade, but the whole hilt is often cased in gold. An example from Mycenae has a cylindrical grip of openwork gold flowers with lapis lazuli in their petals and crystal filling between them; the guard is formed by dragons, similarly inlaid. The most splendid Mycenaean blades are bronze inlaid with gold, electrum, silver, and niello. Here again the work is done on inserted copper plates. This kind of flat inlay seems to have been originally Egyptian; it occurs on daggers (dagger) from the tomb of Queen Aah-Hotep, which are contemporary with the Mycenaean (c. 1600 BC). Moreover, it is significant that two of the Mycenaean designs have Egyptian (art and architecture, Egyptian) subjects (cats hunting ducks among papyrus clumps beside a river in which fish are swimming), though their style is purely Minoan. Another blade bears Minoan warriors fighting lions and lions chasing deer. A dagger from Thira has inlaid ax heads; one from Argos, dolphins; and fragments from the Vaphio tomb show men swimming among flying fish. These are masterpieces of Minoan craftsmanship. In the long, subsequent decadence of the Mycenaean age, however, there seems to have been no invention, and later pieces of goldsmiths' work repeat conventional forms and ornaments.Sir Edgar John Forsdyke Marvin Chauncey RossThe Persians (art and architecture, Iranian) have been skillful metalworkers since the Achaemenid (Achaemenian Dynasty) period (559–330 BC), when they were already acquainted with various techniques such as chasing, embossing, casting, and setting with precious stones. Statuettes of gold and silver are known from the 5th century BC, and vessels of silver and gold from this time take the form of phials, conical cups, vases, and rhyta (drinking cups in the shape of an animal's head). The Oxus treasure in the British Museum and the Susa find in the Louvre, Paris, are good examples of such work. During the Parthian period (247 BC–AD 224), silverwork and goldwork was strongly influenced by Hellenistic predilection for richly decorated bowls and dishes. The zenith of old Iranian metalwork, however, was reached during the Sāsānid (Sāsānian dynasty) period (AD 224–651), when craftsmen achieved great variety in shape, decoration, and technique. Drinking vessels (stem cups and cups with handles), ewers, oval dishes, platters, and bowls are the dominant forms; hunting scenes, drinking scenes, and animals are represented in high relief. The patterns were cut out of solid silver or made separately in sheets and then soldered to the vessel. From this time onward cloisonné enamel was used for jewelry.Bo Vilhelm GyllensvärdGreek and EtruscanThe period of transition from the Bronze to the Iron Age, when Aegean external relations were violently interrupted, was not favourable either to wealth or art; and the only considerable pieces of plate that have come from Greece are embossed and engraved silver bowls made by Phoenicians. Most of them bear elaborate pictorial designs of Egyptian or Assyrian character and are evidently foreign to Greece; but some simpler types, decorated with rows of animals in relief or wrought in the shape of conventional flower bowls, can hardly be distinguished from the first Hellenic products. A severe and elegant silver bowl in the Metropolitan Museum of Art represents the flower type in its finest style. It is cast and chased and probably belongs to the 5th century BC.Silver vases and toilet articles have been found beside the more common bronze in Etruscan tombs; for example, a chased powder box of the 4th century BC in the Metropolitan Museum of Art. Bronze reliefs of an archaic chariot in the same collection have their opulent counterparts in some hammered silver and electrum fragments in London, Munich, and Perugia. The electrum details are attached with rivets.About the 4th century BC, the fashion of ornamenting silver vessels with relief was revived; and this type of work, elaborated in the Hellenistic Age and particularly at Antioch and Alexandria, remained the usual mode of decoration for silver articles until the end of the Roman Empire.The scholar Pliny the Elder (1st century AD) names Greek silversmiths whose work was valued highly at Rome and laments the disappearance of the art in his own day. He must refer only to its quality, for Roman silverware has been abundantly preserved. Many rich hoards in modern collections were buried by design during the calamitous last centuries of the ancient world; and the most sumptuous, the Boscoreale treasure (mostly in the Louvre), was accidentally saved by the same volcanic catastrophe that destroyed Herculaneum and killed Pliny in AD 79. A slightly smaller hoard found at Hildesheim (now in Berlin) also belongs to the early empire. The acquisition and appreciation of silver plate was a sort of cult in Rome. Technical names for various kinds of reliefs were in common use (emblemata, sigilla, crustae); weights were recorded and compared and ostentatiously exaggerated. Large quantities of bullion came to Rome with the spoils of Greece and Asia in the 2nd century BC; and Pliny says that even in republican times there were more than 150 silver dishes of a hundredweight apiece in the city. (Weights of vessels are often marked on their bases.)Cups and jugs of Augustan style are usually covered with ornament in high relief. The subjects are very diverse: historical, mythological, and mystic scenes, formal and naturalistic designs of flowers and foliage, graceful studies of animals and birds. Some cups and jugs have conventional fluting, petals, or gadroons (ornamental bands embellished with continuous patterns); Bacchic masks; and embossed or engraved wreaths, gilt or inlaid with niello. Silver and niello inlay was commonly applied to bronze plates. A singular type of silver bowl (patera clipeata) has a central ornament in high relief or even in the round; the ornament frequently contains a portrait bust. In time the ornament was restricted; and later Roman (Byzantine art) plate is plain with narrow border friezes, small central medallions, and handles embossed in low relief. One of the very few gold pieces that survive, a shallow bowl found at Rennes (Bibliothèque Nationale), is exceedingly elaborate. It measures 10 inches across and weighs 46 ounces. The central medallion and its surrounding frieze contain scenes of a drinking contest between Bacchus and Hercules; between the frieze and the edge of the bowl is a row of 16 gold coins, each framed in a foliate wreath. The coins range from Hadrian to Caracalla. In the same collection are several examples of very large silver plates (clipei or missoria), in which the whole field is embossed with mythological or historical subjects. The largest (called the Shield of Scipio) is 28 inches in diameter and weighs 363 ounces.Sir Edgar John Forsdyke Marvin Chauncey RossEarly Christian (Early Christian art) and ByzantineThe earliest Christian silverwork closely resembles the pagan work of the period in its naturalistic grace, ornament, and use of the traditional techniques of embossing and chasing. Even the subject matter is sometimes classical: the late 4th-century marriage casket of Projecta and Secondus (see photograph—>), part of the Esquiline treasure found at Rome (British Museum), is decorated with pagan scenes; and only the inscription shows that it was made for a Christian marriage. Among the few pieces with Christian subjects are small Roman cruets (condiment bottles) from Taprain, Scotland (Royal Scottish Museum, Edinburgh, and the British Museum), and a small pyx (casket for the reserved Host) from Pola, Yugoslavia (Kunsthistorisches Museum, Vienna).Most of the silver of the latter part of the period has been found in the Christian East—in Syria, Egypt, Cyprus, Asia Minor, and Russia—and is mostly “church” plate (chalices, censers, candlesticks, and bowls and dishes probably used to hold the eucharistic bread). Secular plate was also decorated with religious subjects—for example, dishes depicting the life of David (Cyprus Treasure, Cyprus Museum, Nicosia, and Metropolitan Museum); both dishes and vessels were produced with pagan subjects—for example, the Concesti amphora and the Silenus Dish (both in the Hermitage, Leningrad). The figure style is often harder and flatter than previously, characterized by strictly frontal positions and symmetry. The techniques of chasing and embossing still predominated, but abstract patterns and Christian symbols inlaid in niello were used increasingly. The appearance of imperial “control stamps,” early forerunners of hallmarks, show most of this material to be of the 6th and 7th centuries. It is not known which cities were important centres of production; but the Eastern capital, Constantinople, must have been foremost among them.Of work in gold of the earliest Christian period, only personal jewelry has survived; but from the 6th and 7th centuries onward other pieces are also extant. Among the most important of the latter are votive crowns and crosses offered to churches in Spain and Italy by royal patrons. The finest of these pieces are those found in Guarrazar in Toledo Province (National Archaeological Museum, Madrid, and Musée de Cluny, Paris), inlaid with garnets and jewels; the cross of King Agilulf (cathedral of Monza, Italy); and a pair of gold book covers inscribed by Queen Theodolinda (cathedral of Monza, Italy). The book covers are set with pearls, gems, and cameos and decorated with gold cloisonné work inlaid with garnets, a popular style among the Germanic peoples. Inlaid cloisonné jewelry reached an especially high standard of workmanship in Britain, as is shown by a purse lid, a sword, and jewelry from the cenotaph (monument honouring a dead person whose body lies elsewhere) to a 7th-century East Anglian king discovered at Sutton Hoo, Suffolk (British Museum). Major works in silver and gold were also produced in the northern Hiberno-Saxon (Hiberno-Saxon style) school and in the service of the Celtic Church; work in precious metal, such as the buckle on the Moylough belt reliquary and the Ardagh Chalice in the National Museum of Ireland, Dublin, displays a masterly synthesis of the northern arts and humanist Mediterranean tradition.The earliest works of the Carolingian renaissance, made in the last quarter of the 8th century, resemble Hiberno-Saxon art of the 8th century in their abstract treatment of the human figure, their animal ornament, and their use of niello and “chip-carving” technique; examples are the Tassilo Chalice (Kremsmünster Abbey, Austria) and the Lindau Gospels book cover (Pierpont Morgan Library, New York City). From about 800 onward, however, the influence of the Mediterranean tradition gained strength at Charlemagne's court at Aachen and later spread through the whole empire. Triumphal arches (now lost) given by the Emperor's biographer Einhard to Maastricht cathedral were typical of this movement; miniature versions nine inches (22 centimetres) high of great marble triumphal arches of antiquity, they were embossed in silver with Christian subjects. The bulk of work in precious metals that survives from the Middle Ages is ecclesiastical: golden altars, like that of S. Ambrogio (Sant'Ambrogio Basilica) in Milan (c. 850), where scenes from the life of Christ and St. Ambrose are framed by panels of cloisonné enamel and filigree (openwork); and reliquaries and book covers in gold and silver, set with gems and decorated by embossed figures and scenes, such as the cover of the Codex Aureus of St. Emmeram (c. 870; Bayerische Staatsbibliothek, Munich). These pieces testify to the magnificence of Carolingian work, the techniques of which were to dominate the goldsmith's craft until the 11th century.Patronage throughout this period was mainly in the hands of the emperors and great princes of the church; and the form of liturgical plate and reliquaries, altar crosses, and the like underwent no fundamental change; Ottonian work of the later 10th and 11th centuries can be distinguished from that of the 9th only in the development of style. For example, the larger, more massive figures, with their strict pattern of folds, on the golden altar (c. 1023) given by Henry II to Basel Minster (Musée de Cluny, Paris), are markedly different from the nervous, elongated figures of the Carolingian period.In the 12th century the church supplanted secular rulers as the chief patron of the arts, and the work was carried out in the larger monasteries. Under the direction of such great churchmen as Henry, bishop of Winchester, and Abbot Suger of Saint-Denis, near Paris, a new emphasis was given to subject matter and symbolism.Craftsmen were no longer anonymous; work by Roger of Helmarshausen, Reiner of Huy, Godefroid de Claire (de Huy), Nicholas of Verdun, and others can be identified; and the parts they played as leaders of the great centres of metalwork on the Rhine and the Meuse are recognizable. Their greatest achievement was the development of the brilliant champlevé enamelling, a method that replaced the earlier cloisonné technique. Gold and silver continued to be used as rich settings for enamels; as the framework of portable altars, or small devotional diptychs or triptychs; for embossed figure work in reliquary shrines; and for liturgical plate.The masterpieces of the period are great house-shaped shrines made to contain the relics of saints; for example, the shrine of St. Heribert at Deutz (c. 1160) and Nicholas of Verdun's Shrine of the Three Kings at Cologne (c. 1200). In the latter, the figures are almost freestanding, and in their fine, rhythmic draperies and naturalistic movement they approach the new Gothic style.The growing naturalism of the 13th century is notable in the work of Nicholas' follower Hugo d'Oignies, whose reliquary for the rib of St. Peter at Namur (1228) foreshadows the partly crystal reliquaries in which the freestanding relic is exposed to the view of the faithful; it is decorated with Hugo's particularly fine filigree and enriched by naturalistic cutout leaves and little cast animals and birds.The increasing wealth of the royal courts, of the aristocracy, and, later, of the merchants led to the establishment of secular workshops in the great cities and the foundation of confraternities, or guilds, of goldsmiths and silversmiths, the first being that of Paris in 1202.As in architecture, monumental sculpture, and ivory carving, the lead held by Germany and the Low Countries during the Romanesque period now passed to France. Architectural forms continued to be the basis of design in precious metal; the silver shrine of St. Taurin at Évreux (c. 1250), for example, is a Gothic chapel in miniature, with saints under pointed arches, clustered columns, and small turrets. In England, the few pieces that survived the dissolution of the monasteries in the 16th century follow the same architectural pattern. Notable examples are the 14th-century Ramsey Abbey censer and the magnificent crosier made for William of Wykeham (New College, Oxford). Germany first produced work in the Gothic style in the second half of the 14th century with a large Gothic head reliquary of Charlemagne and the splendid “Three-Tower” reliquary, both still at Aachen. In Italy, despite the undercurrent of classical taste, the Gothic style predominated in the 14th century, especially at Siena; it was also probably in Italy around 1280 that basse-taille enamel—a technique in which intaglio relief carving in the metal below its surface is filled with translucent enamel—originated, whence it spread rapidly through the upper Rhine region to France and England. The Parisian school of enamellers predominated in the latter half of the 14th century. For the first time, enough secular plate survives to show that it equalled the ecclesiastical in opulence: two fine pieces are the Royal Gold Cup made in Paris around 1380 (British Museum) and the so-called King John's Cup, probably English work of around 1340 (King's Lynn, Norfolk).The late Gothic period produced court treasures such as the “Goldenes Rössel” (1403; Stiftskirche, Altötting, West Germany), and the Thorn reliquary (British Museum), both early 15th century. There was also an increased output of secular silver because of the rise of the middle classes; the English mazers (wooden drinking bowls with silver mounts) and the silver spoons with a large variety of finials are examples of this more modest plate. Numerous large reliquaries and altar plate of all kinds were still produced. At the end of the Middle Ages the style of these pieces and of secular plate developed more distinctive national characteristics, strongly influenced by architectural style: in England, by the geometric patterns of the Perpendicular; in Germany, by heavy and bizarre themes of almost Baroque exuberance; and in France, by the fragile elegance of the Flamboyant.The purity standards of silver became rigorously controlled, and “hallmarking (hallmark)” was enforced; the marking of silver in England, especially, was carefully observed.Peter Erik LaskoIslāmThe use of gold and silver in Islāmic lands was limited because it was forbidden by the Qurʾān, and although the prohibition was often ignored, the great value of such objects led to their early destruction and melting down. Islāmic jewelry of the early period is therefore of extreme rarity, represented only by a few items, such as buckles and bracelets of the Fātimid and Mongol periods and such pieces as the Gerona silver chest (akin to similar ivory coffers) in Spain and the Berlin silver tankard of the 13th century, with embossed reliefs of Sāsānian animal friezes.Hermann GoetzRenaissance to modern16th centuryItalian goldsmiths preceded the rest of Europe in reverting to the style of Roman antiquity; but in the absence of antique goldsmiths' work, vases of marble or bronze had to serve as models. Goldsmiths often worked from very free interpretations of the antique made by artists in other media. Many of these designs but very few of the actual pieces have survived; the most famous is an enamelled gold saltcellar (Kunsthistorisches Museum, Vienna) made for Francis I by the celebrated Florentine Benvenuto Cellini (Cellini, Benvenuto). In the second half of the 16th century many gifted Italian and immigrant goldsmiths worked at the court of Cosimo I, grand duke of Tuscany, specializing in vessels of hardstone mounted in enamelled and jewelled gold; their work is well represented in the Museo degli Argenti in the Pitti Palace, Florence, and in the Kunsthistorisches Museum; similar work was done by the Sarachi family in Milan.Little French goldwork is extant, and most of the surviving material is in the Galerie d'Apollon in the Louvre. Among the most sumptuous pieces are a sardonyx (a type of onyx) and gold ewer, the gold St. Michael's Cup (both at the Kunsthistorisches Museum), and a sardonyx-covered cup in the Louvre, all of which display northern features. The massive plate of the Ordre du Saint-Esprit (Louvre), dating from 1581–82, is of quite individual character; and an enamelled gold helmet and shield of Charles IX (1560–74) in the Louvre have no parallel either for quality or opulence.In other parts of Europe, goldsmiths clung to Gothic forms until well into the first half of the century, especially in the provincial towns. Immensely rich in ecclesiastical silver, Spain has little early domestic silver; Spanish silversmiths, platería, gave their name to the heavily ornamented style of the period, Plateresque. Using precious metal from the New World, goldsmiths such as Enrique and Juan de Arfe produced vast containers for the Host known as custodia. The most important Portuguese (Portugal) work, the Belém monstrance, created by Gil Vicente in 1506 for Belém Monastery near Lisbon, is still Gothic in style; later, Portugal developed its own style, related to Spanish work but not copied from it.Some of the finest 16th-century goldsmiths' work was executed in Antwerp and elsewhere by such Flemish (Flemish art) goldsmiths as Hans of Antwerp, goldsmith to Henry VIII, and Jacopo Delfe, called Biliverti, goldsmith to Cosimo I. The Flemish masters showed particular sympathy for the Mannerist style, derived from Italy but transformed by such native engravers as Cornelis Bos and Cornelis Floris. By about 1580, Dutch goldsmiths had begun to rival the Flemish; the van Vianen family of Utrecht won international renown, especially Adam, who excelled at embossing, and his brother Paulus, who worked in Italy, Munich, and in the workshop of Rudolph II at Prague.The principal centres in the north were Nürnberg and Augsburg, the former particularly notable for the exuberant Mannerism of the Jamnitzer family, the latter for its ebony caskets with silver-gilt mounts. Many German princes, especially the dukes of Bavaria, maintained their own court workshops. Production was on a vast scale, and great quantities survive. Characteristic German forms are columbine cups (the trial piece for entry into the Nürnberg Goldsmith's Guild) and standing cups such as the Diana Cup by Hans Petzolt.England is rich in 16th-century secular silver, but church plate was mostly destroyed during the Reformation. The Renaissance style, introduced by the painter Hans Holbein (Holbein, Hans, the Younger) the Younger, who designed vessels for the court, follows that of the Low Countries and Germany. Certain individual forms also were produced, such as standing saltcellars with tiered covers and “steeple” cups, which had a tall finial on the cover.In the first half of the 17th century Dutch goldsmiths, such as the van Vianens and, later, Johannes Lutma the Elder of Amsterdam, developed a fleshy form of ornament known as auricular, which became common in northern Europe, including England—where Christian van Vianen (see photograph—>) worked as court goldsmith to Charles I—and Germany—where the Thirty Years' War (1618–48) reduced both the quantity and quality of production. After midcentury, bold Dutch floral ornament—usually embossed in thin metal, as though the pieces were for display rather than use—was characteristic and influential. France, however, undoubtedly led fashion with its state workshops at the Gobelins, the refined French acanthus ornament contrasting sharply with the coarser Dutch designs. Since Louis XIV melted the royal plate to pay his troops, no French work of this period remains; but its quality is demonstrated in the work of the Huguenot silversmiths who left France after the revocation of the Edict of Nantes in 1685. Mostly provincials, they brought new standards of taste and craftsmanship wherever they settled—particularly in England, where the foremost names of the late 17th and earlier 18th centuries were of French origin: Pierre Harache, Pierre Platel, David Willaume, Simon Pantin, Paul de Lamerie, Paul Crespin, to mention but a few.Silver furniture, a feature of the state rooms at Versailles, became fashionable among kings and noblemen. It was constructed of silver plates attached to a wooden frame; and each suite contained a dressing table, a looking glass, and a pair of candlestands. In France such furniture did not survive the Revolution; but much remains in England, Denmark, Germany, and Russia.After the Thirty Years' War, Germany did not regain its eminence; even the enamelled goldwork from the court workshops at Prague and Munich, which became larger and more ostentatious in colour, was inferior in design and finish. In Scandinavia, particularly Sweden, goldsmiths evolved forms of beakers and tankards showing strong German influence. Spanish silver was of massive architectural design, oval champlevé enamelled bosses being set at intervals over the surface of the larger pieces. The few extant Italian pieces suggest that the goldsmiths worked their material with the skill of sculptors.18th centuryEarly 18th-century English (United Kingdom) work combined functional simplicity with grace of form, while the work of Dutch and German goldsmiths is in a similar style but of less pleasing proportions. The preeminence of the English work, however, is due to the destruction of all but a fraction of French silver of the same period; for what survives is outstanding in originality of design and fineness of finish. The superiority of French work lay in its excellence of design and the high quality of the cast and chased work. Where other goldsmiths worked in embossed (embossing) metal (repoussé), the French modelled and cast their ornament and then applied it—a technique that consumed much more of the precious material.In France, provincial goldsmiths competed successfully with those of the capital; but in England all the best artists went to London. In the early 1730s the French Rococo style was imported to England and adopted by goldsmiths of both Huguenot and English descent, one of the latter being Thomas Heming, goldsmith to George III. English silver in the 18th-century classical style of Robert and James Adam is of unequal merit owing to the use of industrial methods by some large producers.In France, Robert Auguste created pieces of great refinement in the Neoclassical style, which was copied in Turin and in Rome, for example, by L. Valadier. A notable workshop was founded in Madrid in 1778 by D. Antonio Martínez, who favoured severely classical designs. In both the northern and southern Netherlands, local production followed French precept, but more individuality survived in Germany. In Augsburg, excellent table silver was produced, but more important were the pictorial panels embossed in the highest relief by members of the Thelot family and the silver furniture made by the Billers and the Drentwetts. At Dresden, Augustus II the Strong established under Johann Melchior Dinglinger a court workshop that produced jewels and enamelled goldwork unequalled since the Renaissance; and the gold snuffboxes made by Johann Christian Neuber rivalled those of the Parisian goldsmiths.Colonial America (United States)Silversmithing in the New World in the colonial period is more or less derivative from Europe and England. In North America it was first brought to New England by English craftsmen in the 17th century. The most important centres were Boston, Newport, New York City, Philadelphia, Baltimore, and Annapolis. Outstanding collections include the Mabel Brady Garvan collection at Yale University and those in the Boston Museum of Fine Arts, the American Wing of the Metropolitan Museum of Art, and in the Philadelphia Museum of Art. North American colonial silver is distinguished for its simplicity and graceful forms, copied or adapted from English silver of the period. On the other hand, the colonial silver of Mexico, Brazil, Colombia, Peru, Chile, and Bolivia, while European in concept, shows a blending of Iberian designs and forms, with indigenous influences that trace back to pre-Hispanic times. Most of these relics survive in churches as sacramental vessels; but there are some notable private collections.Dudley Tate Easby, Jr.19th centuryThe Napoleonic adventure brought French fashions back into prominence, and the Empire style was widely followed on the Continent. In England the Regency goldsmiths, of whom Paul Storr (Storr, Paul) was the foremost, created their own more robust version of the Empire style. Perhaps the most impressive monument of the period is a service made in Lisbon between 1813 and 1816 and presented to the Duke of Wellington for his liberation of Portugal (now in Apsley House, London).By midcentury most of the earlier styles had been revived fleetingly and a recognizable Victorian style evolved, based on details drawn from diverse sources. Craftsmanship was at its best, but the design of domestic silver was derivative and selective, while that of presentation pieces strove too consciously for naturalistic effect. In the latter half-century the craft became an industry and the goldsmith a factory worker. In this respect Matthew Boulton (Boulton, Matthew) was the great pioneer: his Soho manufactory near Birmingham, which dominated the British “toy” industry from the 1770s, produced high-quality steel buckles, buttons, coins, sterling silver, and Sheffield plate, establishing standards of design and of factory management and welfare services that rivalled those of the 20th century. At the end of the 19th century, standards deteriorated, and a second pioneering movement started—the craft revival associated with William Morris and the Art Nouveau style (see below Modern), which led to the production of original pieces, some of highly mannered design. In England the most interesting work was done by the sculptor Sir Alfred Gilbert, who, following the lead of William Burges, the architect and designer, combined silver with ivory and semiprecious stones in romantic confections.The structure of trade, following the drastic social changes that have taken place since 1914, is similar in all industrial countries. A few artist-craftsmen maintain independent studio workshops, producing commercially unprofitable but artistically significant work. Many of them also teach in art schools or work part-time in factories as industrial designers. Factories using modern equipment—for example, stamping, pressing, spinning, casting, and mechanical polishing—account for nearly all the financial turnover but seldom break new ground artistically. Retail shops buy stock almost entirely from the factories and wholesalers and usually sell it anonymously. Thus, the evolution of style is impeded by the cost of new machinery; by the natural caution of wholesalers and retailers; by the buying public, which prefers precious ornaments to be timeless; and by the consideration that buying is an investment for value rather than for beauty. In consequence, the most lively designs are often those for costume jewelry; and the best modern work usually has been on a tiny scale, making little impact on the trade.In Paris, designs by René Lalique (Lalique, René) inspired Art Nouveau, which spread to Belgium and then through Europe and the United States. In Moscow, Peter Carl Fabergé (Fabergé, Peter Carl) set a superb standard of craftsmanship for small ornaments. In Denmark, Georg Jensen (Jensen, Georg), with Johan Rohde and others, achieved not only an individual Danish style but built up several factories with retail outlets across the world, thus proving that good modern design in silver and jewelry need not be confined to artists' studios; their influence spread throughout Scandinavia. In the 1960s only Germany approached Scandinavia in the number and quality of its artist-craftsmen; WMF (Württembergische Metallwarenfabrik) at Geislingen is probably the biggest silverware (silverwork) factory in Europe. In England, notable for the most varied work, the Worshipful Company of Goldsmiths has helped a vigorous group of designers to emerge since 1945, including Gerald Benney, Eric Clements, David Mellor, John Donald, and Andrew Grima.Graham McK. HughesIn its pure form, tin is far from suitable for making into implements because it is too brittle for casting successfully and is not easy to melt down. For this reason it has always been alloyed with certain other metals, mainly lead, in the proportion of 10:1, or copper, alloyed about 100:4, to make what is known as pewter. In medieval Germany, the municipal authorities and the guilds laid down permissible ratios to be used for tin alloys. The authorities also kept an eye on the pewterers and their products to make sure that regulations were adhered to. So that pewter ware could be kept under constant surveillance, a system was worked out whereby every single article had to be marked by one, two, or more hallmarks (hallmark), or “touches.” The first decrees of this kind to be issued in Germany date from the 14th century. In France and England, written sources refer to the pewterer's obligation to hallmark his wares from the end of the 15th century onward. These regulations do not seem to have been followed very closely in practice, for pieces surviving from the period before 1550 rarely have the regulation marks. In the second half of the 16th century, however, which was the golden age of pewter, almost all work began to be clearly marked. This means that modern collectors have a good chance of being able to identify their pieces.Pewter ware is cast in molds. It is not suitable for chasing or stamping. Molds for simple utensils such as plates, bowls, and jugs were made of clay mixed with calves' hair or of plaster, stone, or slate. From the 16th century, when pewter ware began to be decorated with relief work, molds made of brass or copper (copper work) were used instead. Relief decoration can be applied by two different methods. The pewterer could either chisel the relief decoration (consisting of little scenes, figures, or decorative motifs) into the copper mold in intaglio, which enabled him to make the details as three-dimensional as he wished; or he could etch it in, which involved covering the plain copper mold with wax, scratching the decoration into it, and then allowing caustic acid to act on it. This second method resulted in a rather flat, two-dimensional relief, which is reminiscent of woodcuts in its sharp outlines and overall style; thus, the technique is known as the “woodcut style.” It was common practice in Nürnberg in the last quarter of the 16th century. Pewter utensils (exclusively plates and dishes at this time) were cast in molds prepared in this manner. It was very seldom that decorative motifs were etched straight onto the pewter surface.Another type of decoration is engraving, which involves cutting decorative motifs, figures, or inscriptions with a burin into the surface of pewter objects. The most expensive and aesthetically important pieces of engraved pewter were produced in the late Gothic period, about 1500. In the 16th and 17th centuries, engraving was common for guild articles; and in the 18th century engraved mottoes, names, dates, and motifs taken from popular art were widely used. The type of strokes used fall into three categories: long, engraved lines; dots set close together to form a pattern; and a technique known in German as Flecheln, in which the straight line made by the burin is broken up into a series of long or short zigzag strokes. The last method makes the design look fuller and broader and also makes it stand out more sharply. This type of decoration first appeared in the 16th century and was very popular in the 17th and 18th centuries.After they had been cast and then turned on a lathe, many pewter articles, especially plates and dishes, were hammered. The idea was to smooth over the surface of the object and strengthen the material by means of a series of light and regular blows. Sometimes pewterers punched their wares with decorative motifs stamped close together to form a sort of frieze. This technique is known as tooling and is commonly found on bronze and silver articles. Occasionally, pewter pieces were embellished by the addition of brass fittings, such as handles, knobs, spouts, or scroll panels. But pewter ware has rarely been gilded, partly because it is difficult to make a layer of gilding adhere to the surface, partly because there seems little point in covering a material that is attractive in itself with a metal that is ostensibly more precious. This is also why pewter ware has rarely been painted.A type of pewter inlay is found on what are known as Lichtenhain tankards. Most of these tankards were made in Lower Franconia and in Thüringia in the 18th and 19th centuries. They have wooden staves running down them, and their sides are inlaid with decorative motifs and figures made of thin sheets of engraved pewter. In the early 18th century, furniture was also occasionally inlaid with pewter. Such furniture was clearly inspired by the inlay work of the French cabinetmaker André-Charles Boulle.On the whole, excavations have unearthed little pewter ware dating from antiquity, not only because it has tended to perish over the years but presumably also because it was not nearly as common as glass, bronze, silver, or clay. Excavations on the Esqueline Hill and finds from the Tiber River have produced some small pewter statuettes of divinities that may well be votive offerings. Miniature versions of household articles such as amphorae, oil lamps, and pieces of furniture were found in graves.A number of pewter ampullae (ampulla) (flasks with a globular body and two handles) with inscriptions or highly stylized images or symbols date from the Early Christian (Early Christian art) period. They were sold to pilgrims and were used to hold water from the Jordan River, consecrated water, or oil. (Similar pouch-shaped ampullae reappeared in France in the 14th and 15th centuries; but unlike the early Christian examples, they are ornamented with abstract motifs rather than figure decoration.)Besides the ampullae, hundreds and thousands of pilgrim badges were sold to devout visitors to places of pilgrimage in the Middle Ages. These little plaques and agraffes (hat badges) were generally miniature versions of religious images worshipped at the place where they were on sale. A number of these Italian, English, French, and German pilgrim badges, dating from the 13th to the 16th century, have survived.Instead of jewelry made of gold, silver, or precious stones, the less wealthy people of the Middle Ages wore pewter badges sewn onto their clothes or hats. The badges often took the form of amulets.Because pewter was highly prized in all periods, damaged or old-fashioned utensils were melted down over and over again to make new ones. Thus, the earliest surviving functional objects and vessels made of pewter date from the Gothic era, though a few written sources refer to pewter being used earlier than this. Most of these documents are concerned with the question of whether communion chalices (chalice) should be made of anything other than gold or silver. Pewter Communion chalices were permitted in certain periods and prohibited in others, and the church never managed to draw up an absolute ruling that applied to all religious communities.Some of the finest and most important pewter pieces ever cast were made in Silesia in about 1500. Large guild flagons of a characteristic polygonal design, only 11 of them have been preserved. Their facetted surfaces are engraved with figures of saints surrounded by interlaced foliage scrolls, arches, arcades, and other late Gothic decorative motifs. Hidden among these motifs, one sometimes finds secular scenes, some of which are downright lewd. Pewterers in the neighbouring districts of Moravia and Bohemia also made guild flagons; but theirs were cylindrical, with raised horizontal bands. The areas between the bands were generally decorated with friezelike inscriptions made up of Gothic or Gothic-style characters.The 15th century saw the emergence of a jug set on a slender stem, easily recognizable by its disk-shaped base, surmounted by another slender stem; the main body of the vessel is generally spherical and has a long, thin neck. The municipal authorities often possessed a set of six or 12 flagons of this kind. They came back into fashion in the 17th century and were very widely used, as they had been at the beginning of the 15th century. Unfortunately, only a very few have survived from the earlier periods.Another early type of vessel belongs to a group known as Hanseatic tankards. These tankards have a heavy-looking, potbellied body set on a shallow circular base and a slightly convex lid. They were used in the coastal regions of Germany—that is, along the North Sea and Baltic coasts—and also in the Low Countries and Scandinavia. These regions comprise the area dominated by the Hanseatic League in the Middle Ages, hence the name of the tankards. Other regions of Europe were evolving their own special types of vessels for beer and wine, which, with a few modifications, remained standard for centuries. Thus, it is a very simple matter to distinguish between baluster jugs from London and pichets from Paris or between wine flagons from Switzerland and those made in the Low Countries, Burgundy, the Main regions of Franconia, southern Germany, and the Rhineland. The type of a baluster jug made in the region around Frankfurt-am-Oder and in Brandenburg in northeastern Germany is particularly elegant and distinguished looking. The few jugs of this type that have survived date from about 1500.In all of the districts bordering the Rhine, vessels with flat lenticular (the shape of a double-convex lens) bodies are relatively common. They were used as canteens—sometimes as tankards, in which case they had a base that acted as a stand.16th century to modernThe Baroque (Baroque period) era saw the production of many different types of drinking and pouring vessels, often made of pewter. The guilds, for instance, commissioned drinking vessels in the shape of larger than life-size versions of the tools of their trade or their coats of arms. Another type of vessel was called the Welcome, a drinking vessel that was handed around as a form of greeting or when a toast was being drunk. The body of these vessels was generally cylindrical or potbellied, with a lid and a short shaft set on a circular base.Far fewer plain everyday plates have survived from the 15th and 16th centuries than drinking vessels and containers of the same period. The earliest pewter plates and bowls to have survived in any quantity date from the 17th century.In the last half of the 16th century two places in Europe evolved quite independently, though simultaneously, a new technique for casting pewter. The product was a type of relief-decorated ware known as “display pewter” (Edelzinn), and it gave a new and brilliant impetus to the trade. The first examples were made between 1560 and 1570, and the main centres of production were Nürnberg and Lyon. In the beginning the technique used was not the same in both towns. Whereas in France, relief pewter was cast in engraved brass molds worked with a burin, in Nürnberg etched molds were used. This suggests that the two towns were not influenced by each other in any way. Later on, however, Nürnberg pewterers were strongly influenced by the work of a celebrated French pewterer, François Briot, who was active in Montbeliard, in the county of Württemberg.The first master pewterer documented to have made relief pieces in Lyon is Roland Greffet, between 1528 and 1568. One can assume that it was he who invented this type of work. A school producing tankards and dishes with relief decoration soon grew up in Lyon. The most common decorative motif was an arabesque, which was used in a variety of ways and can be thought of as the leitmotif for the work of this group of artists. The master of relief pewter was François Briot. His most famous piece is the Temperantia Dish, which takes its name from the allegorical figure of Temperance or Temperantia that appears in the centre of it. It dates from 1585–90.Pewter with etched relief decoration was made by Nürnberg pewterers from the last third of the 16th century onward. The earliest piece made by Nicholas Horchhaimer, bearing the date 1567, is a dish cast in an etched mold with an allegorical figure representing Fame, or Fama, in the centre and historical scenes or incidents from classical mythology around the edge. Other large dishes made by Horchhaimer and his contemporary Albrecht Preissensin are again decorated with themes from classical antiquity or sometimes with biblical scenes; for smaller plates they kept to abstract decoration.The use of etched molds did not remain fashionable in Nürnberg for long, and toward the end of the 16th century engraved molds were being used here as well. The work of François Briot was copied by Caspar Enderlein, who modelled his own Temperantia Dish directly on Briot's. The decoration on the ewer that went with it was modelled on Briot's Mars Dish and on a piece known as the Suzannah Dish, which is also attributed to Briot.In the second quarter of the 17th century, smaller relief plates superseded the big dishes and jugs made in Nürnberg. The Mannerist allegories that had been in favour completely disappeared, to be replaced by scenes from the Old and New Testaments, equestrian portraits of the German emperors with the electors round the edge, and luxuriant floral decorations. These plates are no more than about seven inches (18 centimetres) in diameter and are generally flat and disk-shaped. The molds were no longer made by the pewterers themselves but by professional mold cutters, who occasionally added their own monograms. Since molds were often sold by one workshop to another and then to another, one sometimes finds plates cast in the same mold but with different touches. Small decorative plates of this type were so popular that they continued to be made as late as the 18th century. There are no less than nine different models for a plate with an equestrian portrait of Ferdinand III of the House of Habsburg, who was crowned emperor of Germany in Nürnberg in 1637. Similar plates depicting Gustavus Adolphus of Sweden, the Emperor of Turkey, and Duke Eberhard im Bart of Württemberg were also produced.Few places, apart from Nürnberg and France, had a flourishing trade in relief pewter. A few master pewterers in Saxony did execute relief decoration, however, mainly on jugs; they adapted their motifs from lead or bronze plaquettes made in southern Germany. Plates bearing the arms of Switzerland were also produced by Swiss pewterers in the 17th century. They have scenes taken from the history of Switzerland. The golden age of relief pewter, which had begun about 1570, ended in the third quarter of the 17th century. During this period, individual craftsmen had elevated pewter from its humble status as a material from which functional articles were made to one in which brilliant artistic feats could be performed. Relief pewter pieces were solely works of art, nonfunctional objects valued as showpieces.Pewter dishes made in Italy in the 16th and 17th centuries have chased, etched, engraved, or chiselled decoration and lean heavily on artists working in brass or bronze for their designs. An independent pewter trade does not seem to have existed in Italy on anything like a large scale until the 18th century.After the Thirty Years' War the production of functional articles in pewter noticeably increased in northern Europe. Besides a very large number of different types of jugs, each region specializing in its own characteristic design, there were plates and dishes used at table and also basins and bowls, drinking mugs, and screw-top flasks.Yet pewter was already feeling the draught of competition by the end of the 17th century. In this time pewter began to be superseded by products of other branches of the decorative arts. Its first rival, faience ware, was initially no more than an inferior substitute for porcelain; but because the factories that were soon springing up everywhere were able to produce very large quantities of faience, they inflicted heavy damage on the pewter trade. Faced with this situation, the pewterers switched to imitating the designs used by the silversmiths, in the hope of gaining favor in the more ambitious middle class circles. This attempt was successful; and, from the first quarter of the 18th century onward, “silver-type pewter” gained a firm hold, soon influencing the production and appearance of pewter ware made in the Regency and Rococo periods.By about the middle of the 18th century, an ever-widening variety of articles was being made: the pewterers were able to supply anything from a spoon to a whole dinner service, including mustard pots, sauceboats, and spoons for serving punch. But this period of prosperity was short-lived. By the third quarter of the 18th century, pewter was rivalled both by porcelain, which could now be produced relatively cheaply by several factories in Europe, and by the even cheaper English earthenware that flooded markets on the Continent. This new development sealed the fate of the pewter trade. Towns that once had 20 or 30 busy and successful workshops had no more than one or two by the beginning of the 19th century.Although in Germany the demand for pewter seems to have increased for a few years after the Napoleonic era, particularly in country districts, by the middle of the 19th century industrialization finally put an end to a trade that had flourished for centuries.In the second half of the century, when stylistic imitations were all the rage, pewter vessels were produced in the Neo-Baroque, Neo-Rococo, Neo-Gothic, Neo-Renaissance, and other styles that followed the many historicizing trends that emerged. Yet these pieces were made more often by mechanized metalworking factories than by pewterers. The Art Nouveau style that became fashionable at the end of the 19th century brought about a revival of pewter production; and individual firms succeeded in making original, well-designed pieces that are often of considerable aesthetic importance. The firm of Kayser in Oppum near Krefeld played a leading part in this revival. But the outbreak of World War I spelled the end of Art Nouveau—whose heady run of success had anyway been short-lived—and with it the end of old pewter.Hanns-Ulrich HaedekeIronIronwork is fashioned either by forging or casting. wrought iron is the type of ironwork that is forged on an anvil. There are no fabrication similarities to cast iron, which is poured in a molten state into prepared sand molds.Wrought iron is fibrous in structure and light gray in colour. It can be hammered, twisted, or stretched when hot or cold. The more it is hammered, the more brittle and hard it becomes; but it can be brought back to its original state by annealing (heating and then cooling slowly). It will not shatter when dropped.From earliest times, the smith has had a forge to heat the iron, an adjacent water tank in which to cool it, an anvil on which to form it, in addition to a wide assortment of hammers and tools. The most important tool is the anvil. The English type, generally used for forging wrought iron, has a flat top surface, which is used as a solid base for hammering the heated iron into shape, for welding, for splitting, or for incising decorative chisel marks in the hot iron. One end of the anvil is shaped like a pointed cone and is used for forming curved surfaces. The other blunt end, or heel, has one or two square or rectangular holes on top, into which fit various tools. From the anvil is derived the expression “to strike while the iron is hot,” and this implies spontaneity and rapid hammer blows. The wrought-iron craftsman should not be expected to repeat with meticulous exactitude one intricate component after another. In fact, wrought iron by a master craftsman is esteemed for the variations that naturally occur.The individual components of a wrought-iron design are often plain or twisted rods, with or without chisel-mark incisions. They are frequently composed as a series of straight, parallel members or in combination with scrolls, or as a repeat design of some geometric shape such as the quatrefoil. Where two curved members are tangent, they are characteristically secured together by bands or collars, rather than by welding. Where two straight bars intersect, it is accredited craftsmanship to make the vertical bar pierce or thread the horizontal member. Grilles consisting of two series of parallel small-diameter rods, one series at right angles to the other, were sometimes interlaced or woven.Depending upon the depth of the relief, various fabrication techniques may be employed for repoussé, or three-dimensional, ornamental wrought ironwork. Sheets 1/16 inch (1.6 millimetres) or less in thickness generally are used. The general configuration of the modelling is obtained by beating the back of the sheet; the final details are embossed on the front face. The finer the scale and detail, the more work must be done when the iron is cold. A repoussé design may be pierced; but this term usually connotes a solid sheet forged into a mask, a shield, or an entire embossed panel. The traditional means of setting off a cutout repoussé design was to superimpose it on a vermillion-coloured background panel. Modern approximations of repoussé work consist of mechanically stamped designs touched up with random hammer blows.The most difficult way of decorating iron is to carve it. This involves fashioning figurative or decorative motifs out of the metal ingot with especially strengthened tools, using the material in the same way that the sculptor handles wood or stone. Only very precious iron articles are carved, such as coats of arms or pieces that are specifically designed to be displayed as works of art.Hanns-Ulrich HaedekeCast iron is melted in a furnace or cupola, stoked with alternate layers of coking iron, then poured into prepared sand molds. After the cast iron cools in the mold, the sand is cleaned off, and the work is virtually complete. Its shape is fixed, and while a casting can be slightly trued up by the judicious use of a hammer, it is in no sense as workable as wrought iron. Thus, ornamental features in cast iron cannot be chased and polished as in cast bronze. If the ornamental cast-iron details are not replicas of the original pattern, the only recourse is to make a new casting. Because it is brittle, cast iron is almost certain to shatter if dropped.Since it is cast in a mold, certain forms are more suitable to cast iron than to wrought iron. For example, if repetitive balusters, or columns, or panels with low-relief ornamentation are desired, cast iron is the most suitable material.Early historyThe earliest recorded iron artifacts are some beads, dating from about 3500 BC or earlier, found at Jirzah in Egypt. They are made from meteoric iron, as are a number of other objects of only slightly later date that have been found both in Egypt and Mesopotamia (art and architecture, Mesopotamian). The earliest known examples of the use of smelted iron are fragments of a dagger blade in a bronze hilt, dating from the 28th century BC, found at Tall al-Asmar (modern Eshnunna), in Mesopotamia, and some pieces of iron from Tell Chagar Bazar, in the same area, of approximately the same date. There is, however, no evidence of any extensive use of iron in either Egypt or Mesopotamia before the end of the 2nd millennium BC. In Asia Minor, on the other hand, iron was probably used regularly from at least as early as 2000 BC; and it seems likely that the first true iron industry was established there in the second half of the 2nd millennium BC.From the ancient Near East the knowledge of iron working was transmitted to Greece and the Aegean, probably at the beginning of the 1st millennium BC, whence it spread gradually to the rest of Europe. By the 6th century BC, it had been widely disseminated over central and western Europe.Iron was at first apparently regarded as a precious, semi-magical material, presumably because of its rarity and its connection with meteorites. But once it had become common, as a result of increased knowledge of the technique of smelting ore, it seems to have been used, at least in Europe, almost exclusively for objects of utility. A few Belgic firedogs and at least one amphora, skillfully forged in iron, with decorative terminals in the form of animal heads, are known; but the practice of forging iron into decorative shapes does not seem to have become general until the Middle Ages.A few cast-iron objects dating from classical times have been found in Europe. The extreme rarity of these, however, suggests that they were only produced experimentally. The earliest known evidence for the general use of cast iron comes from China (see below East Asia: China: Iron (metalwork)), and it does not seem to have been produced regularly in Europe before the 15th century.Claude BlairThe ironwork of these two small countries prior to the 15th century was in no way inferior to that produced elsewhere. Yet so few pieces remain that the significance of craftsmen of the Low Countries has often been underestimated. During the 15th century, design and craftsmen from the Low Countries began to make their influence evident across the channel in England. Representative examples of this period are in the Hervormde Kerk at Breda; the treasury door of the cathedral at Liège; and hinges of the church of Notre Dame, at Hal. The beautiful spires of Bruges, Ghent, and Antwerp should be mentioned.During the first half of the 16th century, before the Spanish occupation, there were diversified forms of ironwork, such as protective grilles for doors, windows, and chapels, often in fleur-de-lis patterns; window gratings of vertical bars, frequently octagonal in section; and interlacing bars, producing rectangular or lozenge-shaped patterns. Only a few examples still exist: some lunettes in the Hôtel de Ville of Brussels; a tabernacle grille from the chapel of the counts of Flanders and a window grille from the Cathedral of St. Bavon, both from Ghent (Victoria and Albert Museum); and hinges at the Hôtels de Ville of Bruges and Ypres (Flemish Ieper). Few Renaissance screens have survived.During the second half of the 16th century, the cruelty of the Duke of Alba and his 20,000 troops, together with the threat of the Inquisition, drove hundreds of artisans to England. After the Spanish domination there was little indigenous design in Holland and Belgium, and such ironwork as was produced fell under the spell of French imports.The initial use of wrought iron was purely protective because violent attacks were frequent, and doors had to be strengthened with massive ironwork inside and out. Window openings, especially those of the treasuries of mansions and cathedrals, were for similar reasons filled with strong interlacing bars of solid iron; a good example remains at Canterbury cathedral. When, in the course of time, the need for protective barriers ended, there was greater freedom of work and a definite trend toward ornamentation. Throughout England, medieval church doors are found with massive iron hinges, the bands worked in rich ornamental designs of scrollwork, varying from the plain hinge band, with crescent, to the most elaborate filling of the door. Examples exist at Skipwith and Stillingfleet in Yorkshire, many in the eastern counties, others in Gloucester, Somerset, and the west Midlands. The next important application of ironwork came with the erection of the great cathedrals and churches, whose shrines and treasures demanded protection. Winchester Cathedral possesses the remains of one screen with a symmetrical arrangement of scrollwork. Tombs were enclosed within railings of vertical bars with ornamental finials at intervals, such as that of the Black Prince at Canterbury. A new development appeared in the early years of the 15th century when the smith, working in cold iron, attempted to reproduce Gothic stone tracery in metal. This work was more like that of a woodworker than of a smith, often consisting of small pieces of iron chiselled and rivetted, and fixed on a background of sheet iron. Many small objects such as door knockers, handles, and escutcheons were executed in the same manner. A typical monumental example is in Henry V's chantry at Westminster Abbey; but the most magnificent is the great grille at St. George's Chapel, Windsor, made to protect the tomb of Edward IV.The development of the art of smithing during the Renaissance period was very uneven in the various countries of Europe. In 16th-century England the smith fell behind and seemed to have lost interest, producing no very great or important work. He continued to make iron railings, balconies, and small objects for architectural application, such as hinges, latches, locks, and weathercocks. But toward the end of the 17th century, there was a growing interest in beautifying houses and laying out gardens and squares, with a commensurate demand for balconies, staircases, and garden gates. The man to whom the credit is usually given for the revival of ironwork in England was Jean Tijou, a Frenchman who, together with many of his Protestant fellow craftsmen, had been forced to leave his country owing to the revocation of the Edict of Nantes in 1685. After some years in The Netherlands he went to England in 1689, where he enjoyed the patronage and favour of William III. His most important works for his royal patron are to be seen in the immense mass of screens and gates with which he embellished Hampton Court palace. He also executed work at Burleigh house, Stamford. Probably by the Queen's wish he was associated with the architect Sir Christopher Wren (Wren, Sir Christopher), then engaged on the rebuilding of St. Paul's Cathedral. Wren apparently did not particularly like ironwork and probably exercised some restraint on Tijou, with the result that his work at St. Paul's is more dignified and freer from appendages than that of Hampton Court.There is a great amount of fine ironwork of the 18th century in London in the form of gates, railings, lamp holders, door brackets, balconies, and staircases; in almost every suburb there are gates and brackets. The precincts of the colleges of Oxford and Cambridge, as well as almost every old town in England, furnish a variety of handsome work. Throughout the 18th century the smith was a busy man; the general tendency of his work, unaffected by the Rococo movement on the Continent, was toward a less ornate but more characteristically English style—perpendicular, severe, lofty, and commanding, as contrasted with Tijou's French love of richness and mass of details.At the end of the 18th century the work of the architect brothers Adam shows a departure from true smithing; its slender delicate bars are enriched with rosettes, anthemia, and other ornament in brass or lead. The effect is pleasing and harmonizes with the architecture with which it is incorporated.During the first half of the 19th century, the art of the smith was largely eclipsed by that of the iron caster. But under the stimulus of the Victorian Gothic revival and later of the Art Nouveau movement, there was a renewal of interest in the decorative use of wrought iron, and much excellent work was produced.Medieval door-hinge ornaments were not basically different from those in England; and beautiful work is found on church doors, especially in central and northern France. It reaches a height of greater elaboration and magnificence than in England, the culminating example being the west doors of Notre Dame, Paris, the ironwork of which is so wonderful that it was attributed to superhuman workmanship. Grilles at Troyes and Rouen also reveal a high standard of excellence. Working the iron cold and employing methods associated with carpentry was immensely popular; it was applied to small objects such as door handles, knockers, and above all to locks, which exhibit an amazing amount of detail and a remarkable delicacy of finish.The Gothic tradition survived in France until well into the 16th century and was marked by the production of work of the highest skill, largely in the form of locks, knockers, and caskets of chiselled iron. The introduction of the Renaissance style did not radically alter the direction of the smith's art—a strange fact when it is remembered that Germany and Spain were fabricating works of enormous size and magnificence in wrought iron. France, like England at that time, was content to make door furniture, in the form of locks (lock), keys, bolts, escutcheons, and the like, but did little ironwork of any great size. A school of locksmiths came into being under Francis I and Henry II, working from designs by Androuet du Cerceau in the 16th century and those by Mathurin Jousse and Antoine Jacquard in the 17th. The bows (a loop forming the handle) and wards (notches) of keys were of unusually intricate design and the locks of corresponding richness. Representative pieces may be seen at the Victoria and Albert Museum. Among them is the famous Strozzi key, said to have been made for the apartments of Henry III, the bow of which takes the favoured form of two grotesque figures back to back. But as far as architectural ironwork was concerned, France remained almost at a standstill until the accession of Louis XIII in 1610. Under that monarch, a worker at the forge himself, came a great revival, which, by the end of the 17th century, had attained a marvellous pitch of perfection. It proved to be the beginning of a new movement, the force of which made itself felt in the adjoining countries and inspired ironworkers with new energy. From the accession of Louis XIV, the French ironworkers must be acknowledged as the cleverest in Europe, combining as they did good and fitting design with masterly execution. Their designs were often very daring, exploiting all the latent and previously unexplored possibilities of iron. They recognized its great adaptability and took every advantage of it, at the same time being conscious of its limitations. Their forms of expression were endless.Screens and gates were needed for parks, gardens, and avenues, staircases for mansions and palaces, screens for churches and cathedrals. Among celebrated designers were Jean Lepautre, Daniel Marot, and Jean Berain. Earlier work had been of a simple character—balconies, for instance, being in the form of a succession of balusters—but as the smith became more versatile and imaginative, they took the form of panels of flowing curved scrolls, rendered with a freedom never attained before, while constructive strength was observed and symmetry maintained. Enrichments were usually attached in hammered sheet iron. These may be considered the distinguishing features of Louis XIV work, such as that at St. Cloud, Chantilly, Fontainebleau, and elsewhere. But under Louis XIV all previous efforts were surpassed in the work for his palace at Versailles.The art of ironwork received a further impetus by the introduction of the Rococo style. The movement, initiated in 1723, was due principally to the imagination of two artists, Just-Aurèle Meissonier, architect, and Gilles-Marie Oppenordt. There was a balanced asymmetry in the design and fantastic curves with a luxury of applied ornamentation. To the French smith it furnished the opportunity for a yet greater display of his skill. He was clever enough to secure a feeling of stability in his work by counterbalancing swirling masses of ornament with straight constructional lines; he knew how to introduce an iron screen of Rococo style into a Gothic church or cathedral without giving offense to the eye or arousing any uncomfortable feeling of incongruity.Later in the 18th century, ironwork took on a more classical appearance as a result of the general revival of interest in ancient art; and many Greek and Roman details were introduced into the ornamentation. The amount of work executed was prodigious, and its beauty and craftsmanship may be seen in most cities of France. Nearly all of the adjacent countries, with the exception of England, were seized with the desire to imitate the French Rococo style.In the Romanesque period in Germany, bronze was preferred to iron; the earliest examples of ironwork are thus later than those of France and England. The first iron grilles were imitations of French work, with C-scrolls filling spaces between vertical bars. Typical examples of door hinges prior to the 14th century were those at Kaisheim, St. Magnus Church, Brunswick, and St. Elizabeth's Church, Marburg (the latter having a curious cross in the middle). Throughout the Gothic (Gothic art) period in Germany, the imitation of natural foliage was the basis of design.There were no new marked developments in ironwork during the 14th century. Smiths confined their efforts mostly to hinges. Until this period the vine had been the only motif for elaborate hinges; but flat, lozenge-shaped leaves were introduced, such as those at Schloss Lahneck on the Rhine.During the 15th century, grilles became more popular. One of the best examples is the grille in the Monument of Bishop Ernst of Bavaria, Magdeburg cathedral (c. 1495), with elaborate Gothic tracery, nine columns, and a cornice. In hinges the cinquefoil displaced the quatrefoil, as at Orb, Oppenheim, and Magdeburg. The Erfurt cathedral was enriched with notable hinges having the vine pattern interpolated with rosettes and escutcheons of arms. Hinges for houses usually were the plain strap type, but when ornamented they consisted of superimposed layers of sheet iron. As in other parts of Europe at this time, pierced sheet iron was fashioned into tracery of a semi-architectural nature, much like Gothic windows. Pierced ornament and twisted rods were often combined to form grilles, with their extremities beaten into complicated foliage forms.During the Renaissance, ironwork in Germany was in use everywhere and for every purpose: for screens in churches, window grilles, stove guards, gates, fountain railings, well heads, grave crosses, door knockers, handles, locks, iron signs, and small objects for domestic use. Smiths were their own designers and more often than not planned intricate devices merely to show their skill in executing them. They set no limits to their problems; and so far as manipulative excellence went, the German smiths were the foremost in Europe. But clever as their workmanship undoubtedly was, their designs frequently showed a lack of stability and a tendency to run riot. Thus, many of their most imposing works consist largely of filling panels with elaborate, interlacing scrollwork, and the sense of constructional and protective strength is missing.An abundance of smiths' work is to be found in the southern parts of Germany. Iron bars, circular in section, were most frequently used; and the most common features are interlacing bars and terminations of flowers with petals and twisted centres, foliage, or human heads. All of these characteristics occur with almost monotonous repetition, witnessing to skill but also to lack of imagination and sense of design. The style may be studied in many German and Austrian cities, such as Augsburg, Nürnberg, Frankfurt, Salzburg, Munich, and Innsbruck.The German smith gave much attention to door knockers and handles, enclosing them in pierced and embossed escutcheons, and devised locks with very involved mechanism. German influence made itself strongly felt in Switzerland, Austria, and Czechoslovakia.The Baroque and Rococo periods are distinguished by a perfection of detail that exceeded that of German Medieval or Renaissance ironwork. Smiths used wrought iron as though it were a plastic material, meant to be employed in extravagant forms wherever possible. Some examples are at Zwiefalten, Weingarten, and Klosterneuburg. In the late 18th and early 19th centuries, cast ironwork of outstanding quality was produced in Germany, notably at the Prussian royal foundry established in 1804.The few extant examples of ironwork in Italy prior to the 14th century indicate a wide appreciation of how the material could best be worked with only the tools of the smith. Some noteworthy examples are the chancel grille at the left of the nave, Orvieto Cathedral (1337); the grille around the Scaligeri tombs of Verona (c. 1340); the grille at the baptistery of Prato cathedral (1348); the chancel screen in the sacristy chapel of Sta. Croce, Florence (1371); and the grille to the Capella degli Spagnoli, Sta. Maria Novello, Florence.Until the 16th century, Italian smiths respected the natural characteristics of wrought iron by relying almost entirely upon those forms that could be wrought with hammer and anvil. The grille was usually made by dividing it into regular panels with vertical and horizontal bars (sometimes triangular in section and enriched with dentils, or small, projecting triangular blocks). Often the quatrefoil filled some or all of these panels; they were made in Tuscany from a pierced plate and in Venice from separate scrolls collared together. A noted example is in the Palazzo della Signoria, Siena, crowned by a repoussé frieze and surmounted by a cresting of flowers, spikes, and some animal heads.It might have been thought that in the fountainhead of the Renaissance, ironwork would have proceeded at the same pace and with the same brilliant success as architecture, sculpture, bronze (bronze work) casting, and the other arts. Strangely enough, little use of it is found in connection with the fine buildings of the revival. Bronze was favoured; and what in other countries is found in iron has its counterpart in Italy in bronze. As time went on the smiths grew less inclined toward the more difficult processes of hammering and welding and contented themselves ultimately with thin ribbon iron, the various parts of which were fastened together by collars. Work of the later periods may be distinguished, apart from the design, by this feature, whereas the English and French smiths vigorously faced the hardest methods of work, and the German and Spanish smiths invented difficulties for the sheer pleasure of overcoming them.Notable centres of artistic ironwork were Florence, Siena, Vicenza, Venice, Lucca, and Rome, where important pieces may be found in the form of gates, balconies, screens, fanlights (semicircular windows with radiating sash bars like the ribs of a fan), well covers, and a mass of objects for domestic use, such as bowl stands, brackets, and candlesticks.In screenwork the favourite motif was the quatrefoil, which has been found with many variations ever since the 14th century. Early examples are strong and virile, but later ones tend to weakness. The C-shaped scroll is also used in many combinations. The churches and palaces of Venice contain many examples of these popular designs. Peculiar to Italy are the lanterns and banner holders such as may still be seen at Florence, Siena, and elsewhere, and the rare gondola prows of Venice. Of the ironworkers of the early Renaissance, the most famous was the late-15th-century craftsman Niccolo Grosso of Florence, nicknamed “Il Caparra” because he gave no credit but insisted on money on account. From his hand is the well-known lantern on the Palazzo Strozzi in Florence, repeated with variations elsewhere in the same city. Siena has lanterns and banner holders attached to the facades of its palaces, and lanterns are still to be seen at Lucca and a few other towns.The decadence of 17th- and 18th-century ironwork paralleled that of architecture. Designs were borrowed directly from France and Germany. The metal was too often worked cold, using thin members; and the resulting construction was flimsy. Scrolls were often encased in thin, grasslike leaves. Conventional or naturalistic flowers were tacked on as seeming afterthoughts. Instead of using rods and bars, ribbonlike bands were used, with cast ornaments pinned on. Intersecting tracery was copied from Germany. The best examples of this period are confined to Venice and northern Italy, such as the screen in the south aisle chapel of S. Ambrogio, Milan; the chapel enclosure in S. Pietro, Mantua; and the screen in the Palazzo Capodilista, Padua.Prior to the 15th century, Spanish ironwork was basically similar to that in France and England. The Spanish smith accepted the limitations imposed by anvil and ancillary tools; but he skillfully exploited to the limit all manner of variations—twisting square rods, coiling flat bars into C-shaped scrolls of all sizes, and devising imaginative crestings to surmount the top of church chapel screens or domestic window grilles. Many Moorish craftsmen of extraordinary ability were enticed to remain in Spain as the Moors were slowly pushed southward; the resultant blending of Gothic with Moorish resulted in the Mudejar style.Ironwork of the Renaissance period from about 1450 to 1525 reached a height of grandeur and magnificence attained in no other country. Of all the Spanish craftsmen the smiths were the busiest, especially during the 16th century. The ironwork products that for more than a century dominated the craft are the monumental screens (rejas) found in all the great cathedrals of Spain. These immense structures, rising 25 to 30 feet (7.5 to nine metres) show several horizontal bands, or tiers, of balusters, sometimes divided vertically by columns of hammered work and horizontally by friezes of hammered arabesque ornament. Usually such screens are surmounted by a cresting, which is sometimes of simple ornament but more often a very elaborate design into which are introduced a large number of human figures. Shields of arms are freely incorporated; and the use of bright colour, silvering, and gilding adds to their impressive beauty. The great balusters were always forged from the solid, and their presence in hundreds demonstrates the extraordinary skill and power of the Spanish smith. In many cathedrals two of these monumental rejas are found facing one another. There is at least one in every large cathedral—Barcelona, Saragossa, Toledo, Sevilla (Seville), Burgos, Granada, Córdoba, and many others.Ironwork on a smaller scale is found in gates, balconies, and window screens; wrought-iron pulpits also exist. Panels of hammered and pierced iron, heightened with colours and gilding, were used in connection with domestic architecture; and many doors were ornamented with elaborate nailheads or embossed studs.William Walter Watts Gerald K. GeerlingsThe characteristics of the earliest ironwork in the various colonies naturally reflected those of the parent countries. The English were more sparing in its use in the New England Colonies than were the Germans in Pennsylvania or the French in Louisiana. In the 17th and 18th centuries ironwork was used mostly for such practical purposes as weather vanes, foot scrapers, strap hinges, latches, locks, and particularly for the necessities and conveniences for fireplaces (firedogs, cranes, skewers, toasters, kettle warmers, and spits). It was not until the late 18th century, when the threat of Indian raids and food shortages had waned and the established communities enjoyed a sense of tranquillity and prosperity, that smiths fashioned wrought iron into railings, fences, grilles, gates, and balconies. Square or flat iron bars were generally used to produce designs that were usually light, airy, and graceful and rather in contrast to the contemporary European preference for sturdier forms.Gradually, ironwork designs tended to develop characteristics of an American or composite nature, as a logical consequence of the diverse origins of colonists and smiths. An innovation that appeared toward the end of the 18th century was the combination of structural wrought-iron rods or bars with lead or cast-iron ornamental features. While the use of wrought iron declined in the 19th century, during its last quarter the use of cast-iron columns and panels for nonresidential buildings increased. These designs, timid or bold, decorative or structural, engendered the prototypes of commercial buildings for the ensuing decades.Because the life of structures in U.S. cities has been short, there are few examples of 18th- or early 19th-century ironwork extant in New York City, not many more in Boston, some in Philadelphia, but more in and near Washington, D.C., such as the excellent balconies and railings at the Octagon (headquarters of the American Institute of Architects). Charleston, South Carolina, has a rich legacy in gates, notably those at numbers 12, 23, and 36 Legare Street, 63 Meeting Street, and an unusually beautiful pair at St. Michael's Church.New Orleans has more ironwork than other U.S. cities, thanks to a group of citizens dedicated to the preservation of the old French Quarter. Its earliest ironwork was forged by Spanish and French smiths. Unfortunately, fires, rust, and remodelling have so taken their toll of the Spanish ironwork that almost the only remaining example of importance is the gateway of the Cabildo (town hall). It has moldings beaten from solid bars, like many of the old rejas in Spanish cathedrals. After the Louisiana Purchase in 1803, the influx of ironworkers from northern states brought about a broadening of influences that is apparent in designs and techniques. Ironwork of New Orleans can be roughly divided into three periods: (1) forged wrought iron by French and Spanish artisans with strongly marked European characteristics; (2) a transitional period with wrought-iron structural members embellished with cast-iron ornaments in the Directoire and Empire styles of France, plus some U.S. innovations; and (3) entire grilles, screens, and trellises made entirely of cast iron. No other city in the U.S. has two- and even three-story iron porches and balconies that can compare with those of New Orleans. Some of these lacy structures, such as those on St. Peter Street, were built above the sidewalks. Balconies sometimes not only extended across an entire facade but continued around a corner.Mid-19th century onwardDistinctive national characteristics in the design of ironwork gradually tended to disappear in Europe because of increased travel and communications between countries. The influence of French Renaissance architecture (modified or revived) continued to exert a viable effect where the acceptance of the Art Nouveau (last quarter of the 19th century) was flaccid or denied. In England, however, 18th-century designs continued with slight modifications. In the U.S. probably the most important force, prior to World War I, was exercised by architects trained in Paris, with the result that ironwork designs were similar to French (France) work of this period.The increased mechanization of all forms of manufacture understandably affected the character and use of ironwork. As the cost of cast iron came down, its use increased. Because wrought iron is produced by hand by beating red-hot iron on an anvil, not much change was possible through increased mechanization, whereas the casting of molten iron lent itself to improved equipment and techniques. The lowered cost of duplicating ornamental cast-iron components and the introduction of structural steel parts expanded the usage of ironwork to the modest building, whereas it had been generally confined to public or monumental structures. Foundries in the U.S. established a flourishing business in pierced cast-iron panels, modelled after Louisiana porch trellises.Compared with prior periods, the last half of the 19th century will scarcely be commemorated as introducing enduring or beautiful ironwork forms. It was not until the first quarter of the 20th century that a master craftsman-designer gave impetus to a new conception of design forms and textures. Edgar Brandt of Paris broadened the scope of decorative usage by the rich inventiveness of his compositions and by an entirely original approach that resulted in a wrought-iron texture that is akin to beaten silver. Examples of his work at the Exposition des Arts Décoratifs Modernes at Paris in 1925 had an immediate effect upon ironwork designed and executed in the U.S. during the great building boom that lasted until about 1930. During this period, both wrought and cast iron enjoyed an unprecedented period of popularity not only in the form of bank screens, entrance doors, and grilles in public buildings but as decorative grilles and gates in private homes. In many cases the craftsmanship equalled that of representative examples of the Gothic or Renaissance periods in Europe.One of the most gifted and dedicated iron craftsmen in the U.S (United States)., Samuel Yellin of Philadelphia, raised the standards of wrought-iron craftsmanship to its apex during the 1920s. He not only trained an atelier of craftsmen for the first time in the U.S., but by his efforts wrought iron was recognized as capable of enriching even the most monumental building. Yellin's influence, however, was ended by the Depression of the early 1930s. As building activity declined after 1930, so did the use of ironwork; and it did not increase with the revival of building after World War II.LeadLead has two main uses in which some artistic purpose may be served: in architecture, as a material for roof coverings, gutters, piping, and cisterns; and in decorative art, as a material for sculpture and applied ornament. As an architectural material it has the advantage of being easily worked and yet offers great resistance to climatic conditions. The low melting point of lead and its relative freedom from contraction when solidifying make it particularly suitable for casting, and it has been used as a substitute for bronze or precious metals.The earliest known lead sculptures are small votive figures found at Troy and Mycenae. In the Hellenistic period lead sarcophagi were known, and the Romans made much use of the metal. Large amounts of worked lead in various forms have been found in those parts of England where the Romans had permanent settlements.England was one of the main lead-producing areas in the Middle Ages, and lead was more widely employed there than on the continent of Europe. In the 12th century the German monk Theophilus, in his treatise on metalworking, refers to lead only in connection with casting rods for stained-glass windows and as a material through which silver sheets might be hammered; but in England at about the same time a remarkable series of lead fonts was cast, of which 16 still survive in position, the most famous being those at Walton-on-the-Hill, Surrey, and at Wareham and Dorchester in Dorset. Lead was also used in the Middle Ages for church roofing; and it was used, doubtless because of its cheapness, for the small badges or medallions sold to pilgrims at the great medieval shrines. Lead could even be useful, in the proper disguise, to simulate rich ecclesiastical objects, for not all religious institutions were wealthy: a group of 14th-century caskets covered with lead tracery, gilded to look like precious metal, have survived in church treasuries. These were used as reliquaries, but some were originally made for secular purposes.Renaissance to modernThe Renaissance passion for collecting bronze medals and plaquettes led to a demand for cheap replicas, and these were made with great precision in lead. The metal also played an important role in the goldsmiths' trade. The fashion for elaborate relief ornament of the Renaissance and Mannerist periods called for a degree of skill in modelling that was beyond the powers of the average goldsmith. The practice therefore grew up for the pattern makers of Augsburg and Nürnberg, Germany, to sell lead models of ornamental details and figures from which goldsmiths working elsewhere could in turn make molds. An extensive collection of these models is preserved in the Historisches Museum, Basel, Switzerland. The trade expanded to include large medallions and plaquettes, the chief masters of which were the German goldsmiths Peter Flötner, Jonas Silber, and the Master H.G. (Hans Jamnitzer) and the Dutch goldsmith family of van Vianen. Lead in sculpture is more suitable for the production of small figures than life-size statues, which, if unsupported, become distorted through their own weight. Among the few life-size equestrian lead statues is one of Frederick Louis, prince of Wales, in the grounds of Hartwell House, Buckinghamshire, England. From the 16th century, lead appeared in England in the form of gutters and pipe heads (which carried rainwater down from the gutters), often with cast ornament. Some of the late-17th- and early-18th-century pipe heads, cast with the arms of the owner of the house and the date of erection, are important decorative features.An extension of the use of lead took place with the introduction of lead garden sculpture—figures, vases, and urns—in the late 17th century. An example of this work is a pair of garden vases 15 feet high at Schloss Scheissheim in Bavaria. The silvery gray colour of such sculpture and its resistance to the weather made it suitable for use in the many formal gardens that were created at this time. English garden sculpture rarely achieves any particular aesthetic status; but in 18th-century Germany and Austria lead was used for more serious sculpture by a group of artists of high standing. In the 19th century, lead was out of favour with sculptors, partly because improved transport made it possible to bring marble from Italy at low cost. Its soft colouring and the fact that it does not reflect light give it advantages, however, and it has been used in the 20th century by Aristide Maillol and by Sir Jacob Epstein, who executed the lead figure of the Virgin and Child in Cavendish Square, London.Non-Western metalworkSouth AsiaThe manufacture of iron by primitive smallscale methods has survived in southern India and Ceylon (Sri Lanka) to the present day. The slag heaps of ancient furnaces are common, and the processes have probably been in use for more than 2,000 years; but it is unknown whether they are of indigenous invention or acquired. In southern India iron immediately succeeded stone as a material for tools and weapons, and prehistoric iron weapons began to come into use about 500 BC. The wrought-iron pillar of Delhi, set up about AD 400 by Kumāra Gupta I in honour of his father, is over 23 feet (seven metres) in height and weighs more than six tons. It demonstrates the abilities of Indian metalworkers in handling large masses of material, for not until the latter part of the 19th century could anything of the same kind have been made in Europe. There are other large iron pillars at Dhār and at Mt. Abu.Ed.Gold and silverIn India, gold jewelry (goldwork) has been found from the Indus culture. Excavations at Takshasila (Taxila) have revealed gold and silver (silverwork) drinking vessels and jewelry of Hellenistic types dating back to about the 1st century AD. From the same time is the important Buddhist gold reliquary from Bimaran, Afghanistan, set in rubies and decorated with embossed figures in Gandhāra style (British Museum).During the Gupta (Gupta dynasty) period (AD 320–647), vessels of Hellenistic and Persian shapes were evidently made, for they are represented in the sculpture and frescoes of the period. More Indian in style are a silver dish of the 3rd or 4th century, decorated with a Bacchanalian scene of a yakṣa drinking (see photograph—>), and a silver bowl of the 7th century from northern India, which is embellished with medallions in low relief (both in the British Museum). Jewelry played a very important role, and, although no original pieces have survived, it can be studied in frescoes at Ajanta and on contemporary sculptures.In spite of the fact that gold and silver vessels have been common in India since classical times, there is very little material extant before the 17th century, when all kinds of vessels were produced in bronze, brass, copper, and, for the royal houses, in silver. Shapes and decorations vary in different regions. Delhi was famous for its craftsmen, especially in the time of Akbar in the 16th century and Jahāngīr and Shāh Jahān in the 17th. Much work was done in precious metal, and vessels and ornaments of jade were inlaid with gold and gems. Northern India is famous for its enamels (enamelwork). Enamellers from Lahore were brought to Jaīpur in the 16th century by Mān Singh, and enamel was employed extensively in combination with goldwork and silverwork in the 17th and 18th centuries there and elsewhere. The Punjab, Lucknow, and the districts of Chānda and Cutch in Gujarāt state were long celebrated for their metalworkers. In the south, silverwork in svamin-style is characterized by religious-figure scenes in relief, executed in three different techniques. Craftsmen in Tirupati put silver sheet on copper; Madras, Bangalore, and Tiruchirāppalli are known for hammered vessels with traced decoration; and Thanjāvūr (Tanjore) produced a more Baroque effect with inlays of silver in copper. From the former Travancore state, Mysore, and Bijaipur in the southwest come chased vessels with floral patterns, the lotus predominating. In the north the Hindu style is well represented by works from Vārānasi (Benares).Persian-Islāmic (Islamic arts) influence is found in several vessel shapes; for example, ewers and basins for water and smoking furniture, such as hookas, which also have Islāmic patterns. jewelry from the later periods employs precious stones, pearls, gold, and silver in great variety. The old types are repeated, with symmetrical arrangements of rosettes and leaves for bracelets, necklaces, pendants, rings, and foot ornaments. Very fine work in silver filigree was executed at Cuttack in Orissa and was used on jewelry and various larger items.Central and Southeast AsiaIndian styles and techniques spread to the neighbouring countries. In Nepal precious metals were used in architecture; pagodas, temples, and palaces sometimes had facades richly decorated with ornaments embossed in gilt copper with settings of precious stones.In Tibet copper and brass were usually used for vessels, but these metals were often decorated with applied silver or gold ornaments; and in eastern Tibet, especially, teapots were made of silver with gilt appliqué. While many of the ornaments are Chinese, Buddhist (Buddhism) shapes and patterns of Indian origin were used for ritual vessels (ceremonial object). Other ritual objects were sometimes made of silver or, more rarely, of gold, though bronze (bronze work) is again the common material. Silver is used for amulets and jewelry with rich settings of turquoises, carnelian, and lapis lazuli.In Thailand, Buddhist vessels were made out of chased silver, very often in the shape of a lotus flower whose petals are decorated with other, embossed, floral and figure motifs.Burma (Myanmar) is known for its chased silver vessels heavily decorated with figures and floral patterns in relief, related to the south Indian svamin work. The use of gold and silver vessels for domestic purposes was denied to all but those of royal blood. Good examples of earlier golden regalia are in the Victoria and Albert Museum.In Vietnam, goldwork and silverwork of the Cham culture are preserved from the 10th century. It is exemplified by a crown and heavy jewelry made for a life-size statue found in the ruin of a temple at Mison. From later times there is a royal treasure with four crowns, various amulets, arm rings, and table services of gold, richly decorated with embossing and openwork.Bo Vilhelm GyllensvärdEast AsiaBronzes have been cast in China for about 3,700 years. Most bronzes of about 1500–300 BC, roughly the Bronze Age in China, may be described as ritual vessels intended for the worship of ancestors, who are often named in inscriptions on the bronzes. Many were specially cast to commemorate important events in the lives of their possessors. The vessels were also meant to serve as heirlooms, and the inscriptions often end with the admonishment “Let sons and grandsons for a myriad years cherish and use.” These ritual vessels of ancient China include some of the loveliest objects ever made by man, and as a group they represent possibly the most remarkable achievement in the whole history of metalcraft before modern times. Since the vessels can be considered sculpture, they are discussed in East Asian arts (arts, East Asian).Among other ritual bronzes, bells (bell) constitute an important group. Perhaps the oldest class is a small clappered bell called ling, but the best known is certainly the suspended, clapperless bell, chung (zhong). Chung were cast in sets of eight or more, to form a musical scale, and were probably played in the company of string and wind instruments. The section is a flattened ellipse, and on each side of the body appear 18 blunt spikes, or bosses, arranged in three double rows of three. These often show marks of filing, and it has been suggested that they were devices whereby the bell could be tuned to the requisite pitch by removing small quantities of the metal. The oldest specimen recovered in a closed excavation is one from P'u-tu Ts'un, dating from the 9th century BC.Vast numbers of secular bronzes were cast. These include weapons, such as the chih and ko dagger axes and the short sword; chariot and harness fittings; trigger mechanisms for bows; weights, scales, and measures; belt hooks; and mirrors (mirror). The last appear in great numbers from the 5th century BC onward. They are flat disks, with a central perforated boss by which they could be mounted on a stand. Their backs are covered with a maze of intricate relief designs and feature a diversified series of well-defined subjects.William Young WillettsIron began to take its place in the brilliant Bronze Age culture of China during the Ch'in dynasty (221–206 BC) and the Han dynasty (206 BC–AD 220). By the end of the 2nd century AD, bronze weapons had been almost completely supplanted, and iron had been generally substituted for bronze in common use in utensils and vessels of various kinds, tools, chariot fittings, and even small pieces of sculpture. These were commonly cast in sand molds, were patterned after bronze prototypes, and were typical of the Han period in style and decoration.From the 9th century, iron increasingly took the place of bronze in China as a material for sculpture, especially in the north and under the Sung dynasty. The few extant examples from the 11th century and later show work done on a larger scale and in coarser technique than the bronzes, though the modelling is usually more naturalistic.Several iron pagodas (pagoda), dating from the 10th to the 14th century and ranging in size from miniature models to towers 100 feet or more in height, give further evidence of the dexterity of the Chinese iron caster. The pagodas imitate, in detail, both the structural and decorative effects of the more common tile-roofed brick pagodas. Iron for temple furniture has long been in use, and a large number of the braziers, censers, caldrons, and bells found today in the temples are of iron.In China in the 17th century the iron picture was developed, the craftsmen seeking to reproduce in permanent form through the medium of wrought iron the effects of the popular ink sketches of the master painters. When completed, these pictorial compositions were mounted in windows, in lanterns, or in frames as pictures. When in the latter form, a paper or silk background often bore the signature and seal of the maker, heightening the resemblance to a painting. The craft flourished in Anhwei Province and is still practiced, though with less patience and fineness than formerly.Benjamin MarchGold and silverIn ancient China gold and silver were rare. Gold was used as an inlay for bronzes in the Chou dynasty (1111–255 BC), and between the 6th and the 2nd centuries, gilding and silvering were common. Dress hooks and small items of jewelry were sometimes cast in gold and silver and imitated the more usual bronze forms. Granular work—a technique that probably has an Indian origin—was used for jewelry.Silverwork first became important during the T'ang dynasty (Tang dynasty) (AD 618–907), when the Chinese had learned from the Sāsānid Persians how to chase the silver. In the beginning, they followed their teachers very closely in the forms of the bowls and larger vessels as well as in the patterns. T'ang drinking vessels, ewers, trays, and lobed oval dishes on a stem are Persian shapes transformed by Chinese taste. Among the patterns are vine and palmette scrolls of great variety, hunting scenes, and landscapes of symmetrical flowers and trees with birds and animals; all of these have parallels in Persian silver and textiles but are more delicate in their Chinese version. The techniques used by the Sāsānid silversmiths were adopted by the Chinese; for example, double sheets for a bowl and tracing of the patterns on ring-matted ground. T'ang jewelry is made of gold or gilt silver.During the Sung dynasty (960–1279), silverwork declined in technical quality but jewelry played a more dominant role. Hair ornaments became increasingly intricate, with elaborate naturalistic flowers and various auspicious symbols.During the Yüan (1206–1368) and Ming (1368–1644) periods, skill in silverwork revived, and once again the smiths followed many Near Eastern styles. Drinking vessels (ewers and cups), boxes, and even large ceremonial gold vessels have been found in Ming tombs. During the excavation of the tomb of Emperor Wan-li (1572–1620), a series of gold vessels set with precious stones was found. All of the gold items are decorated with incised patterns of dragons, phoenixes, and similar subjects.During the Ch'ing period (1644–1911/12), both silver and gold were used lavishly, and gold filigree work especially is common in the 18th century. Most of the forms and ornaments employed, however, are borrowed from lacquer and porcelain ware; and only jewelry has its own style, rich combinations of kingfisher feathers glued to the metal.The Chinese colonists who settled Korea during the Han empire (206 BC–AD 220) first brought goldsmiths and silversmiths to Korea. By the 5th to 6th century AD Korean work, as exemplified by large gold crowns and various pieces of jewelry excavated from tombs at Kyŏngju, was beginning to develop distinctive characteristics. At the time of the Unified Silla (668–935) and Koryŏ (935–1392) kingdoms, Chinese influence was strong, but the Korean style persisted in silverwork and goldwork. Several vessels with floral patterns in relief are preserved from these periods.Bo Vilhelm GyllensvärdThe Iron Age in Japan is supposed to have begun in the 2nd century BC, though the chief early remains are weapons that date from the dolmens of the 2nd to the 8th century AD. The Japanese iron founder attained a considerable skill at an early date and acquired a social position that was never attained by the bronze caster or by the ironworkers in China, where the Bronze Age tradition was much stronger. It is apparent that iron was used in China chiefly as a substitute or imitative medium; it was worked often with great skill but with little artistic invention. In Japan, however, the ironworker developed a distinctive and original means of expression and high artistic attainment in accessories for the sword. With the rise of feudalism and the establishment of the samurai class after the wars of the 12th century, the necessary equipment of the warriors became a focus for the efforts of the artist.At first these efforts were devoted to the embellishment of defensive armour, but from the 15th century the sword became the centre of attention. The blade is not properly part of the subject of this article; but in the mountings, especially the guards (tsuba), is found exquisite artistry expressed chiefly in iron. A remarkably soft and pure variety of the metal especially free from sulfur was employed. It was worked by casting, hammering, and chiselling; and innumerable surface effects were obtained by tooling, inlaying, incrustation, combination with other metals, and patination by various, usually secret, processes. Simple conventional patterns, crests, and pictorial designs were the bases for the decoration. As these were often furnished by painters or designers, the criterion of connoisseurship in Japan is the unsurpassed technical quality of the handling of the iron itself. With the promulgation of the edict of 1876, prohibiting the wearing of swords, this art came to an end, but the skill of the Japanese ironworker may still be noted in numerous small decorative objects.Benjamin MarchGold and silverKnowledge of metalwork seems to have spread to Japan by way of Korea during the Yayoi period (c. 250 BC–c. AD 250), but gold and silver never played any important role there. In the Nara period (AD 710–784), the Chinese T'ang style was dominant, and most of the goldwork and silverwork preserved in the Shōsōin at Nara was made under Chinese influence or by Chinese workmen. Silver vessels were used extensively among the aristocracy in the Heian period (794–1185), though not many of these vessels have survived, and both gold and silver were often used for applied reliefs or as inlay on bronze. In the later periods the use of precious metals was practically confined to inlays in bronze or iron, and the highest technical skill is shown by the artists who made the sword fittings.Bo Vilhelm GyllensvärdAmerican Indian peoplesIn pre-Columbian America (Native American art), gold, silver, and copper were the principal metals that were worked, with tin, lead, and platinum used less frequently. When the Spaniards arrived in the New World in the 16th century, they found a wide range of well-developed technical skills in fine metalwork in Mexico, Costa Rica, Panama, and the Andean region. They had very little to offer the Indian smiths, who had already mastered the techniques of cold hammering and annealing; embossed (embossing) decoration (repoussé) and chasing; pressing sheet gold over or into carved molds to make a series of identical forms; sheathing wood, bone, resin, and shell ornaments with gold foil; decorating with metal inlays and incrustation with jade, rock crystal, turquoise, and other stones; joining by clinching, stapling, and soldering; possibly drawing gold wire (in Ecuador and western Mexico); casting by the lost-wax method of solid and hollow ornaments, often with false filigree or false granulation decoration; wash gilding; and colouring alloys containing gold by “pickling” in plant acids. There was some regional specialization: hammer work in “raising” a vessel from a flat disk of sheet gold or silver reached its apogee in Peru, and lost-wax (lost-wax process) casting was highly developed in Colombia, Panama, Costa Rica, and Mexico. Miniature, hollow lost-wax castings of the Mixtec goldsmiths in Mexico have never been surpassed in delicacy, realism, and precision; and some solid-cast frogs from Panama are so tiny and fine that they must be viewed through a magnifying glass to be appreciated. In Mexico bimetallic objects of gold and silver were made by two-stage casting; the gold part was cast first and the silver, which has a lower melting point, was then “cast on” to the gold in a separate operation. (A famous example is the pectoral of Teotitlán del Camino in the National Museum in Mexico City.) A silver llama in the American Museum of Natural History in New York City indicates that the Peruvian smiths had taken the first step toward cloisonné, the cloisons being filled with cinnabar instead of enamel.A truly great technological and artistic triumph of the pre-Hispanic workers in Ecuador was the making of complex beads of microscopic fineness from an alloy of gold and platinum. This feat was achieved by sintering (to combine by alternately hammering and heating without melting) gold dust and small grains of alluvial platinum. (Platinum was a metal not to be used in Europe until 500 or 600 years later.)As in other early cultures, the pre-Hispanic goldsmiths were a privileged and highly respected group, sometimes having their own patron deity such as Xipe Totec in Mexico or Chibchachun in Colombia. In Peru just before and at the time of the Conquest, the goldsmith (kori-camayoc) is said to have been a full-time government worker, who was supported by the state and who produced exclusively for the Inca. According to early Mexican picture writings (codices) and accounts of the Spanish chroniclers, the craft was hereditary, the secrets passed on from father to son.The earliest examples of metalwork in the New World come from the “Old Copper” culture that flourished in the upper Great Lakes region of North America beginning about 4000 BC and continuing over the course of the next 2,000 years. The earliest goldwork is considerably later and consists of sheet-gold adornments with embossed decoration from Chongoyape, Peru, that were made sometime between 1000 and 500 BC. Casting seems to have begun in Mochica times early in the Christian Era in northern Peru, whence it is thought to have spread northward into Ecuador, Colombia, Panama, Costa Rica, and finally Mexico. Dating in the intervening areas is problematical, but it is generally accepted that fine metalwork in gold, silver, and copper did not reach the valley of Oaxaca in Mexico until about AD 900. Some finds in western Mexico suggest an earlier beginning date there and also that knowledge of the craft came by sea rather than overland from South America.It is said that the Spaniards saw some pre-Columbian goldwork when they first arrived in Florida, but none seems to have survived. Some pre-European North American copper work, however, has survived. Metalwork was limited to a few regions in pre-European times. The “Old Copper” culture people took advantage of deposits of native copper (as opposed to smelting copper ores) to make tools and implements, and at a later period the Hopewell people extensively made copper ornaments and weapons, produced by cold hammering. A few copper bells also have been found in Arizona Hohokam sites, but these are imports that were manufactured in Mexico.The famed Indian silverwork in the southwestern United States did not begin until 1853, when the craft was introduced to the Navajo by Mexican smiths. Although the origin is Mexican, certain ornament types and modes of decoration among the Navajo, as one scholar points out, trace back to earlier Indian silverworking in the eastern woodland, the plains, and the Rocky Mountains. It was not until 1872 that the first Zuni smith learned the craft from the Navajo. The Zuni had been carving turquoise long before the introduction of silversmithing, so it is not surprising that the most prominent characteristic of Zuni work is the extravagant use of turquoise insets. Navajo work is distinguished by die-stamped designs, whereas die work is very rare in Zuni silver. Authentic Navajo and Zuni pieces are still being made, but the tourist market has been flooded with cheap, commercial imitations.The outstanding centre for fine handwork in silver in the Western Hemisphere is the little village of Taxco in the state of Guerrero, Mexico. An American resident, William Spratling (Spratling, William), revived the ancient craft there in 1931 and trained a whole generation of talented silversmiths.Dudley Tate Easby, Jr.African (art, African) Negro peoplesIn Africa jewelry was fashioned from gold and silver as well as from nonprecious metals; heavy neck rings, anklets, and bracelets, for example, were made of forged iron or cast brass. Except for iron, metals were usually associated with prestige and/or leadership. Metals were also used for utilitarian objects such as Ashanti cast-brass weights (for weighing gold dust), which depict humans, other animals, vegetables, and geometric forms. The Nupe were excellent metalworkers, manufacturing a variety of vessels decorated with embossed designs.Throwing knives of the Congo, often with punchwork designs, exemplify finely forged, abstract forms of iron weapons. Blacksmiths produced such ritual utensils as single or double gongs; Bambara, Dogon, and Lubi staffs topped with equestrian, human, and animal figures; and Yoruba and Benin (Benin City) shrine pieces containing mammal and bird forms.Brass figure sculpture, which was cast by the lost-wax process, was usually the prerogative of royalty, as in Dahomey, and at Ife and Benin in Nigeria. Ife castings appear quite naturalistic and are among the finest sub-Saharan art. They are mostly hollow-cast heads, possibly used in ancestral rites. Benin “bronzes” were reported as early as the 16th century, but not until the 1890s did they become well-known in Europe. Local traditions indicate that the technique and the first caster came from Ife, in the 14th century. Predominant forms were heads representing deceased Benin kings, often supporting a carved ivory tusk. These, with other figurative castings as well as bells, were placed on altars that were dedicated to early kings. Figurative plaques were used as architectural decoration. Excellent thinly cast pieces, fairly close to the style of Ife, gave way to heavy, overdecorated pieces of the later 19th century.Although metals appear throughout Africa, the cast “bronzes” (often brass) of Nigeria are particularly noteworthy. The earliest, from Igbo Ukwu, may be as early as the 9th century, those of Ife as early as the 12th century; Benin castings are later, and those of the Yoruba most recent. Lower Niger Bronze Industries is a term referring to one or more as yet inadequately studied traditions of uncertain date from various places in southern Nigeria.Roy SieberAdditional ReadingGeneral worksGeorgius Agricola, De re metallica (1556; Eng. trans., 1912, reprinted 1950), a scholarly translation of a mining and metallurgical classic; Leslie Aitchison, A History of Metals, 2 vol. (1960), outstanding for its completeness, competence, and excellent index; The Pirotechnia of Vannoccio Biringuccio, trans. from the Italian with introduction and notes by Cyril Stanley Smith and Martha Teach Gnudi (1942), a description of Biringuccio's practices of smelting and metallurgy; Herbert H. Coghlan, Notes on the Prehistoric Metallurgy of Copper and Bronze in the Old World (1951), an authoritative study with a chapter on various methods of working, such as forging, casting, and sheet metalworking; Robert J. Forbes, Metallurgy in Antiquity, 9 vol. (1950; new ed., Studies in Ancient Technology, 1964– ), vol. 8 devoted to the discussion of early metallurgy, the smith and his tools, gold, silver and lead, zinc and brass, and vol. 9 containing the chapters on copper, tin and bronze, and iron—these publications are authoritative and the bibliographies are comprehensive; Hanns U. Haedeke, Metalwork (1970), a study of European metalwork from the Middle Ages to the 19th century that emphasizes the socio-economic aspects of decorative arts in copper, brass, bronze, iron, and pewter; R. Goowdwin-Smith, English Domestic Metalwork (1937), deals with technology and style as well as types of domestic objects and utensils; Raymond Lister, The Craftsman in Metal (1966), an enlightening discussion of the techniques of metalworking in various historical periods; Thomas A. Rickard, Man and Metals: A History of Mining in Relation to the Development of Civilization, 2 vol. (1932), shows that civilization was developed by the skillful use of metals in industry and the arts; Charles Singer et al. (eds.), A History of Technology, 5 vol. (1954–58), the standard general reference book in the field of technology that covers the history of metalwork from early times to about 1900 AD—each subject is written by a master, the illustrations are numerous, well selected, and well explained; R.F. Tylecote, Metallurgy in Archaeology: A Prehistory of Metallurgy in the British Isles (1962), includes chapters on gold, copper and copper alloys, tin and tin alloys, lead and silver, methods of fabrication, and cites extensive references (the last half of the book is devoted to the study of iron). Later studies include James A. Mulholland, A History of Metals in Colonial America (1981); and Oppi Untracht, Jewelry Concept and Technology (1982).Silver and goldStaton Abbey, The Goldsmith's and Silversmith's Handbook, 2nd ed. rev. (1968); P. Ackerman, “The Art of the Parthian Silver- and Goldsmiths,” E. Margulies, “Cloisonne Enamel,” and J. Orbeli, “Sasanian and Early Islamic Metalwork,” in A Survey of Persian Art, ed. by A.U. Pope, vol. 1 (1938); Lawrence Anderson, The Art of the Silversmith in Mexico, 1519–1936, 2 vol. (1941); Clara Louise Avery, Early American Silver (1930, reprinted 1968); Gudmund Boesen and Christen A. Boje, Gammelt dansk sølv til bordbrug (1948; Eng. trans., Old Danish Silver, 1949); Kathryn C. Buhler, American Silver (1950); Benvenuto Cellini, Treatises . . . on Goldsmithing and Sculpture (Eng. trans. 1898, reprinted 1966); Michael Clayton, The Collector's Dictionary of the Silver and Gold of Great Britain and North America (1971); Ernest M. Currier, Marks of Early American Silversmiths . . . (1938, reprinted 1970); Frank Davis, French Silver (1970); Eric Delieb, Investing in Silver, new ed. (1970); Faith Dennis, Three Centuries of French Domestic Silver, 2 vol. (1960); Johan W. Frederiks, Dutch Silver, 4 vol. (1952–61), Renaissance–18th century; John F. Hayward, Huguenot Silver in England, 1688–1727 (1959); Henry D. Hill, Antique Gold Boxes (1953); Graham Hood, American Silver: A History of Style, 1650–1900 (1971); G.E.P. and J.P. How, English and Scottish Silver Spoons, 3 vol. (1952); G. Bernard and Therle Hughes, Three Centuries of English Domestic Silver, 1500–1820 (1968); G. Bernard Hughes, Small Antique Silverware (1957); Charles J. Jackson, English Goldsmiths and Their Marks, 2nd ed. rev. (1921, reprinted 1964); Heinz Leitermann, Deutsche Goldschmiedekunst (1953); Charles C. Oman, English Domestic Silver, 6th ed. (1965); John Marshall Phillips, American Silver (1949); Jonathan Stone, English Silver of the Eighteenth Century (1965); Gerald Taylor, Silver, rev. ed. (1964) and Continental Gold and Silver (1967); Patricia Wardle, Victorian Silver and Silver-Plate (1963). (Modern): Esbjorn Hiort, Modern Danish Silver (1954); Georg Jensen, Inc., Fifty Years of Danish Silver in the Georg Jensen Tradition (1956); Worshipful Company of Goldsmiths, Modern British Silver (1951, 1954, 1959, 1964).Middle and Far EastHenry L. Roth, Oriental Silver, Malay and Chinese (1910, reprinted 1966); Harry L. Tilly, The Silverwork of Burma (1902); Y. Okada, “History of Japanese Ceramics and Metalwork,” Pageant of Japanese Art, vol. 4 (1952).North and South America—Pre-ColumbianJohn Adair, The Navajo and Pueblo Silversmiths (1944, reprinted 1970); Jose Perez de Barradas, Orfebrería prehispánica de Colombia, 4 vol. (1954–58); Alfonso Caso, “La Orfebrería, prehispánica,” in Artes de Mexico, no. 10 (1955); Dudley T. Easby, Jr., “Ancient American Goldsmiths,” Natural History, 65:401–409 (1956); Marshall H. Saville, The Goldsmith's Art in Ancient Mexico (1920); Arthur S. Woodward, A Brief History of Navajo Silversmithing (1938). (Sheffield plate and pewter): Frederick Bradbury, British and Irish Silver Assay Office Marks, 1544–1968 . . ., 12th ed. (1968); Howard Herschel Cotterell, Pewter Down the Ages, 2 pt. (1932) and Old Pewter: Its Makers and Marks in England, Scotland and Ireland (1929, reprinted 1963); John B. Kerfoot, American Pewter (1924); H.J.L.J. Masse, Chats on Old Pewter, ed. and rev. by Ronald F. Michaelis (1949); Edward Wenham, Old Sheffield Plate (1955); Seymour B. Wyler, The Book of Sheffield Plate, with All Known Makers' Marks Including Victorian Plate Insignia (1949).IronworkMaxwell Ayrton and Arnold Silcock, Wrought Iron and Its Decorative Use (1929); Arthur and Mildred S. Byne, Spanish Ironwork (1915); Herbert H. Coghlan, Notes on Prehistoric and Early Iron in the Old World (1956); Charles J. Ffoulkes, Decorative Ironwork from the XIth to the XVIIIth Century (1913); Edgar B. Frank, Petite Ferronnerie ancienne (1948; Eng. trans., Old French Ironwork, 1950); J. Starkie Gardner, English Ironwork of the XVIIth and XVIIIth Centuries (1911) and Continental Ironwork of the Renaissance and Later Periods, rev. ed. (1930); Gerald K. Geerlings, Wrought Iron in Architecture (1929) and Metal Crafts in Architecture (1929); John Gloag and Derek Bridgwater, A History of Cast Iron in Architecture (1948); John Harris (comp.), English Decorative Ironwork from Contemporary Source Books, 1610–1836 (1960); Otto Hover, Das Eisenwerk, 3rd rev. ed. (1953; Eng. trans., A Handbook of Wrought Iron from the Middle Ages to the End of the Eighteenth Century; U.S. title, Wrought Iron: Encyclopedia of Ironwork; 1962); J. Seymour Lindsay, Iron and Brass Implements of the English House, rev. ed. (U.S. title, Iron and Brass Implements of the English and American House; 1964); Raymond Lister, Decorative Wrought Ironwork in Great Britain (1957) and Decorative Cast Ironwork in Great Britain (1960); Joseph Needham, “Iron and Steel Production in Ancient and Medieval China,” in Clerks and Craftsmen in China and the West, ch. 8 (1970); Wallace Nutting, Early American Ironwork (1919); Albert H. Sonn, Early American Wrought Iron, 3 vol. (1928).LeadworkWilliam R. Lethaby, Leadwork, Old and Ornamental, and for the Most Part English (1893); Sir Lawrence Weaver, English Leadwork: Its Art and History (1909); George Zarnecki, English Romanesque Lead Sculpture: Lead Fonts of the Twelfth Century (1957).Copper, brass, and bronzeFrederick Burgess, Chats on Old Copper and Brass, rev. ed. (1954); Henry J. Kauffmann, American Copper and Brass, (1968); Albert J. Kook, Early Chinese Bronzes (1970); Hermann Leisinger, Romanesque Bronzes (op. cit.); David G. Mitten and Suzannah F. Doeringer, Master Bronzes from the Classical World (1968); Hugo Munsterberg, Chinese Buddhist Bronzes (1967); Macklin's Monumental Brasses, rev. by John Page-Phillips (1969); John T. Perry, Dinanderie: A History and Description of Mediaeval Art Work in Copper, Brass, and Bronze (1910); John Pope-Hennessey, Renaissance Bronzes from the Samuel H. Kress Collection (1965); George Savage, A Concise History of Bronzes (1968); C. Sivaramamurti, South Indian Bronzes (1963); Ernest R. Suffling, English Church Brasses: From the 13th to the 17th Century (1970); Alexander Soper, Chinese, Korean, and Japanese Bronzes (1966); Leon Underwood, Bronzes of West Africa, 2nd ed. (1968); William Watson, Ancient Chinese Bronzes (1962).Decorative metalworkLeslie Aitchison, A History of Metals, 2 vol. (1960); J. Starkie Gardner, Ironwork (various editions, 1892–1930); Hermann Leisinger, Romanesque Bronzes: Church Portals in Mediaeval Europe (1957); Cyril Stanley Smith, A History of Metallography: The Development of Ideas on the Structure of Metals Before 1890 (1960).
* * *
Look at other dictionaries:
Metalwork — Metalwork in the Service of the Church † Catholic Encyclopedia ► Metalwork in the Service of the Church From the earliest days the Church has employed utensils and vessels of metal in its liturgical ceremonies … Catholic encyclopedia
metalwork — ► NOUN 1) the art of making things from metal. 2) metal objects collectively … English terms dictionary
metalwork — [met′ l wʉrk΄] n. 1. things made of metal 2. METALWORKING … English World dictionary
metalwork — [[t]me̱t(ə)lwɜː(r)k[/t]] 1) N UNCOUNT Metalwork is the activity of making objects out of metal in a skilful way. He was a craftsman in metalwork from Dresden... Many are employed in the prison s wood and metalwork factories. 2) N UNCOUNT The… … English dictionary
metalwork — met|al|work [ˈmetlwə:k US wə:rk] n [U] 1.) objects made by shaping metal ▪ a huge collection of antique metalwork 2.) the activity or skill of making metal objects ▪ Students can study woodwork or metalwork. >metalworker n … Dictionary of contemporary English
metalwork — noun a) Objects made of metal. The local blacksmith made all the metalwork for this reconstructed old house. b) The act of shaping metal, metalworking … Wiktionary
metalwork — noun (U) 1 the activity or skill of making metal objects: metalwork classes 2 objects made by shaping metal metalworker noun (C) … Longman dictionary of contemporary English
metalwork — /ˈmɛtlwɜk / (say metlwerk) noun 1. the art or craft of working with metal. 2. objects produced by metalwork. –metalworking, noun –metalworker, noun … Australian English dictionary
metalwork — noun Date: circa 1845 the product of metalworking; especially a metal object of artistic merit • metalworker noun … New Collegiate Dictionary
metalwork — met|al|work [ metl,wɜrk ] noun uncount 1. ) the skill of making things out of metal 2. ) metal objects or the metal parts of something … Usage of the words and phrases in modern English