hydraulics

/huy draw"liks, -drol"iks/, n. (used with a sing. v.)
the science that deals with the laws governing water or other liquids in motion and their applications in engineering; practical or applied hydrodynamics.
[1665-75; see HYDRAULIC, -ICS]

* * *

Branch of science concerned with the practical applications of fluids, primarily liquids, in motion.

It is related to fluid mechanics, which in large part provides its theoretical foundation. Hydraulics deals with such matters as the flow of liquids in pipes, rivers, and channels and their confinement by dams and tanks. Some of its principles apply also to gases, usually when variations in density are relatively small. The scope of hydraulics extends to such mechanical devices as actuators and control systems. See also Bernoulli's principle, Pascal's law, pump.

* * *

      branch of science concerned with the practical applications of fluids, primarily liquids, in motion. It is related to fluid mechanics (q.v.), which in large part provides its theoretical foundation. Hydraulics deals with such matters as the flow of liquids in pipes, rivers, and channels and their confinement by dams and tanks. Some of its principles apply also to gases, usually in cases in which variations in density are relatively small. Consequently, the scope of hydraulics extends to such mechanical devices as fans and gas turbines and to pneumatic control systems.

      Liquids in motion or under pressure did useful work for man for many centuries before French scientist-philosopher Blaise Pascal and Swiss physicist Daniel Bernoulli formulated the laws on which modern hydraulic-power technology is based. Pascal's law, formulated in about 1650, states that pressure in a liquid is transmitted equally in all directions; i.e, when water is made to fill a closed container, the application of pressure at any point will be transmitted to all sides of the container. In the hydraulic press, Pascal's law is used to gain an increase in force; a small force applied to a small piston in a small cylinder is transmitted through a tube to a large cylinder, where it presses equally against all sides of the cylinder, including the large piston.

      Bernoulli's law, formulated about a century later, states that energy in a fluid is due to elevation, motion, and pressure, and if there are no losses due to friction and no work done, the sum of the energies remains constant. Thus, velocity energy, deriving from motion, can be partly converted to pressure energy by enlarging the cross section of a pipe, which slows down the flow but increases the area against which the fluid is pressing.

      Until the 19th century it was not possible to develop velocities and pressures much greater than those provided by nature, but the invention of pumps brought a vast potential for application of the discoveries of Pascal and Bernoulli. In 1882 the city of London built a hydraulic system that delivered pressurized water through street mains to drive machinery in factories. In 1906 an important advance in hydraulic techniques was made when an oil hydraulic system was installed to raise and control the guns of the USS “Virginia.” In the 1920s, self-contained hydraulic units consisting of a pump, controls, and motor were developed, opening the way to applications in machine tools, automobiles, farm and earth-moving machinery, locomotives, ships, airplanes, and spacecraft.

      In hydraulic-power systems there are five elements: the driver, the pump, the control valves, the motor, and the load. The driver may be an electric motor or an engine of any type. The pump acts mainly to increase pressure. The motor may be a counterpart of the pump, transforming hydraulic input into mechanical output. Motors may produce either rotary or reciprocating motion in the load.

      The growth of fluid-power technology since World War II has been phenomenal. In the operation and control of machine tools, farm machinery, construction machinery, and mining machinery, fluid power can compete successfully with mechanical and electrical systems (see fluidics). Its chief advantages are flexibility and the ability to multiply forces efficiently; it also provides fast and accurate response to controls. Fluid power can provide a force of a few ounces or one of thousands of tons.

      Hydraulic-power systems have become one of the major energy-transmission technologies utilized by all phases of industrial, agricultural, and defense activity. Modern aircraft, for example, use hydraulic systems to activate their controls and to operate landing gears and brakes. Virtually all missiles, as well as their ground-support equipment, utilize fluid power. Automobiles use hydraulic-power systems in their transmissions, brakes, and steering mechanisms. Mass production and its offspring, automation, in many industries have their foundations in the utilization of fluid-power systems.

* * *


Universalium. 2010.

Look at other dictionaries:

  • Hydraulics — Hy*drau lics, n. [Cf. F. hydraulique.] That branch of science, or of engineering, which treats of fluids in motion, especially of water, its action in rivers and canals, the works and machinery for conducting or raising it, its use as a prime… …   The Collaborative International Dictionary of English

  • hydraulics — 1670s, from HYDRAULIC (Cf. hydraulic); also see ICS (Cf. ics) …   Etymology dictionary

  • hydraulics — [hī drô′liks, hīdrä′liks] n. the branch of physics having to do with the mechanical properties of water and other liquids in motion and with the application of these properties in engineering …   English World dictionary

  • Hydraulics — For the mechanical technology, see hydraulic machinery. For the United States Navy ship, see USS Hydraulic (SP 2584). Hydraulics and other studies[1] Hydraulics is a topic in applied science and …   Wikipedia

  • hydraulics — Mechanics Me*chan ics, n. [Cf. F. m[ e]canique.] That science, or branch of applied mathematics, which treats of the action of forces on bodies. [1913 Webster] Note: That part of mechanics which considers the action of forces in producing rest or …   The Collaborative International Dictionary of English

  • hydraulics — [[t]haɪdrɒ̱lɪks, AM drɔ͟ːl [/t]] N UNCOUNT Hydraulics is the study and use of systems that work using hydraulic pressure …   English dictionary

  • hydraulics — hidraulika statusas T sritis automatika atitikmenys: angl. hydraulics vok. hydraulik, f rus. гидравлика, f pranc. hydraulique, f …   Automatikos terminų žodynas

  • hydraulics — hidraulika statusas T sritis fizika atitikmenys: angl. hydraulics vok. Hydraulik, f rus. гидравлика, f pranc. hydraulique, f …   Fizikos terminų žodynas

  • hydraulics — noun plural but singular in construction Date: 1671 a branch of science that deals with practical applications (as the transmission of energy or the effects of flow) of liquid (as water) in motion …   New Collegiate Dictionary

  • hydraulics — noun a) The engineering science that deals with practical applications where liquid is in motion and transmits energy. b) The hydraulic system of a vehicle or other machine …   Wiktionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.